Owner’s Manual

DRIVER SUPPORT
240
Rear Park Assist Camera (PAC) –
introduction
The Park Assist Camera is designed to provide
the driver with a view of the area behind the vehi-
cle when backing up.
Introduction
PAC uses the display in the center console to
show the area behind the car while you are back-
ing up.
PAC also shows guiding lines in the on-screen
image to indicate the direction that the vehicle
will take as it moves rearward, which helps sim-
plify parallel parking, backing into a tight space or
when attaching a trailer to the vehicle.
The images of vehicles in this section are generic
and may not depict your specific model.
NOTE
A trailer hitch whose wiring is integrated with
the vehicle's electrical system will be taken
into account when measuring the available
space behind the vehicle.
WARNING
•
PAC is designed to be a supplementary
aid when parking the vehicle. It is not,
however, intended to replace the driver’s
attention and judgment.
•
The camera has blind spots where it can-
not detect objects or people around or
near the vehicle.
•
Pay particular attention to people or ani-
mals that are close to the vehicle.
•
Objects seen on the screen may be
closer than they appear to be.
Related information
•
Rear Park Assist Camera (PAC) – operation
(p. 241)
•
Rear Park Assist Camera (PAC) – limitations
(p. 244)
Rear Park Assist Camera (PAC) –
function
Function
The driver sees what is behind the vehicle and if
a person or animal should suddenly appear from
the side.
PAC is mounted on the rear of the trunk lid, near
the opening handle.
The camera has built-in electronics that help
reduce the “fish-eye” effect so that the image
shown on the screen is as natural as possible.
This may cause some objects on the screen to
“lean,” which is normal.