Owner’s Manual

STARTING AND DRIVING
}}
* Option/accessory, for more information, see Introduction.
255
1. The turn signals will flash several times.
2. The engine will start.
3. The turn signals will illuminate for 3 seconds
to indicate that the engine has started.
After the engine has started, the vehicle remains
locked but the alarm is disarmed.
Active functions
When the engine is started with ERS, the follow-
ing functions are activated:
•
The climate control system
•
The infotainment system.
•
Approach lighting
Deactivated functions
When the engine is started with ERS, the follow-
ing functions are deactivated:
•
Headlights
•
Parking lights
•
License plate lights
•
Windshield wipers
Related information
•
Engine Remote Start (ERS)* – switching off
the engine (p. 255)
•
Engine Remote Start (ERS)* – introduction
(p. 254)
Engine Remote Start (ERS)* –
switching off the engine
Any of the following will switch off the engine if it
has been started with ERS:
•
Pressing the lock button (1) or the unlock
button (2) on the remote key
•
Unlocking the vehicle
•
Opening a door
•
Depressing the accelerator or brake pedal
•
Moving the gear selector from the P position
•
If there are less than approx. 2.5 gallons
(10 liters) of fuel in the tank
•
More than 15 minutes have elapsed.
If the engine has been started with ERS and
switches off, the turn signals will illuminate for
3 seconds.
Message in the instrument panel display
If ERS is interrupted, a text message will be dis-
played in the instrument panel.
Related information
•
Engine Remote Start (ERS)* – introduction
(p. 254)
•
Engine Remote Start (ERS)* – starting the
engine (p. 254)
Jump starting
Follow these instructions to jump start your vehi-
cle's dead battery or to jump start another vehi-
cle's dead battery using your vehicle.
G021347
Connecting the jumper cables
If the 12-volt auxiliary battery to be used is in
another vehicle, check that the vehicles are not
touching to prevent premature completion of a
circuit. Be sure to follow jump starting instruc-
tions provided for the other vehicle.
To jump start your vehicle:
1. Switch off the ignition (set the ignition to
mode 0, see Ignition modes (p. 74)).
2. First connect the red jumper cable to the
auxiliary battery's positive (+) terminal (1).