Owner’s Manual

MAINTENANCE AND SERVICING
340
Bulbs – extra high beam
The extra high beam bulb is concealed by the
larger cover.
Extra high beam
2
1. Remove the headlight housing from the vehi-
cle (see Bulbs – headlight housing (p. 337)).
2. Remove the cover over the bulbs (see Bulbs
– cover (p. 338)).
3. Remove the bulb by turning it counterclock-
wise and pulling it straight out.
4. Remove the connector from the bulb.
5. Press the new bulb into the socket and turn
it clockwise to put it in place. It can only be
secured in one position.
6. Put the cover back into position and reinstall
the headlight housing.
Related information
•
Bulbs – specifications (p. 343)
Bulbs – front turn signals
The turn signal bulb is concealed behind the
smaller cover.
1. Remove the headlight housing from the vehi-
cle (see Bulbs – headlight housing (p. 337)).
2. Remove the cover by pulling it straight out.
3. Pull the holder to access the bulb.
4. Press in the bulb and turn it to remove it
from the holder.
5. Press and turn the new bulb into place.
6. Reinsert the bulb holder into the headlight
housing.
7. Put the cover back into position and reinstall
the headlight housing.
2
Models with optional Active Bending Lights only.