Installation Guide

WALL
Mounting
Plate
A
Ground
Screw
E
© VONN Lighting,2017
Step 1. Connect Wires
Wire
Connector
D
White
(Neutral Wire)
Black
(Line Wire)
Bare Copper
(Ground Wire)
Supply Wires:
Ground Wires:
Connect Black (Line Wire) from fixture to Black (Hot Wire)
from outlet box.
Connect White (Neutral Wire) from fixture to White (Neutral
Wire) from outlet box.
Connect Bare Copper (Ground Wire) from fixture to Green
or Bare Copper (Ground Wire) from outlet box.
Twist wires together clockwise and secure with wire
connector (D).
Installer Tip (1): If ground wire is not available in outlet box,
then secure Bare Copper (Ground Wire) from fixture to
ground screw (E) on mounting plate (A).
Installer Tip (2): Supply wires can be either tucked into
outlet box or fixture canopy.