Instructions / Assembly

© VONN Lighting,2018
Legend
L = Live/Hot/Black
N = Neutral/White
= Ground/Green
•Install expansion bolts (A) onto concrete floor.
Concrete Floor
1.Nut
2.Lock Washer
3.Flat Washer
2. Supply Wires:
Ground Wires:
Bring power wires to fixture location in accordance to local
electrical codes.
Connect White (Neutral Wire) from fixture to power White
(Neutral Wire).
Connect Green (Ground Wire) from fixture to supply Green
(Ground Wire).
Twist wires together clockwise and secure with wire
connector (B).
Installer Tip (1): Nut, lock washer, and flat washer are
attached to expansion bolt.
3. Install Bollard
Install fixture to expansion bolts (A). Secure with nut, lock
washer, and flat washer.
ON
ON
Circuit Box
4. Turn Power ON
Turn electricity “ON” at main fuse box.
1. Install Expansion Bolts
Connect Black (Line Wire) from fixture to power Black (Hot
Wire).
•
•
•
•
•
•
L
N
A
B
Installation Hole Size