Installation Sheet

Step 1. Adjust Height
© VONN Lighting,2017
The length of the cable is adjustable. To determine the
proper length of the fixture, hold the fixture canopy up
against the outlet box in the ceiling to adjust the cable.
Depress locking pin on the canopy, hold pin in place,
and pull down or push up on the cable. Repeat step for
each cable.
Installer Tip (1): It is recommended that two installers are
required to adjust the height of the fixture. One installer to hold
the fixture, and the second installer to adjust the cables.
Locking Pin
Cable
Allen Key
Locking Pin
Option 1
Option 2
Once the desired height is established, lock cable with
locking nut (Option 1) or two hole cable lock (Option 2)
inside canopy.