Operation Manual

10 English

Using a phillips head screwdriver, re-

move grill by unscrewing the 4 screws

located along the perimeter of the inlet

grill at roughly 2, 5, 7, and 11 o’clock

positions. This will release the grill. To

reattach, position grill so the logo in

the center of the grill is straight. Models

5303, 6303, 6803, 7503, 7803, align the

Locator Pin (A) to reconnect grill. Once

aligned replace screws.

Model 1303, align the Alignment Rib (B)

to reconnect grill. Once aligned replace

screws.

CLEANING

GRILL REMOVAL Screwdriver required.

WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing grill.

Use the brush attachment on your

household vacuum cleaner to

vacuum any accumulated dust off

the Front Grill and Air Inlets.

Note: The motor is

permanently lubricated

and requires no oiling.