Operation Manual

English

CORD MANAGEMENT (Models 5303, 6303, and 7503)

1. Wrap cord around Air Accelerator, located on back of unit.

Secure cord with three clips (G) located at 2, 6 and 10 o'clock

positions.

Air Accelerator

ADJUSTING HEIGHT (Models 6803 and 7803 Only)

1. Before adjusting the height of the circulator, support the circu-

lator head with one hand. Use your other hand to loosen the

height adjustment collar by gently rotating it counter-clockwise.

2. Slowly raise or lower the pole to the desired height and secure

into position by rotating the adjustment collar clockwise until tight.