Product specifications

7-12
Installing and Verifying Avid System Software
Installing the Driver for the Sound Board
This section describes installation of the driver for the Turtle Beach
Montego II (Turtle Beach) sound board supported on the IBM 6868
system. Other boards might work, but Avid has tested the Turtle
Beach Montego II board.
n
Avid recommends you install the sound board driver using the following
procedure and not use the installation procedure that ships with the sound
board.
To install the driver for the Turtle Beach sound board:
1. Insert the CD-ROM packaged with the sound board into the
CD-ROM drive.
2. Open the Control Panel and double-click the Multimedia icon.
The Multimedia Properties dialog box appears.
3. Click the Devices tab.
4. Click the Add button.
5. Select the Unlisted or Updated Driver option and press OK.
A dialog box appears requesting the source path of the drivers to
be installed. Either type a specific path or use the Browse button to
locate the appropriate location of the drivers. Choose the
CD-ROM drive from the submenu and navigate to the 2000
directory. Select the 2000 folder and click OK.
6. In the Install Driver dialog box click OK. The Add Unlisted or
Updated Driver dialog box appears. Select Turtle Beach
Montego II, and then click OK. The driver is installed. You will
receive a message asking if you want to restart your system. Click
Restart Now.