Product specifications

3-2
Checking the Basic IBM 6868 System
Connecting the Basic System
You need to connect and check the basic system before you place any
Avid boards in the system (see Figure 3-1). This allows you to make
sure the system you receive works prior to making any changes.
To connect the basic system:
1. Connect the keyboard to the keyboard port at the rear of the
IBM 6868 system.
2. Connect the mouse to the mouse port at the rear of the IBM 6868
system.
3. Connect a single monitor to the AGP graphics board at the rear of
the IBM 6868 system.
4. Connect all power cables.
Figure 3-1 Basic System Connections
AGP graphics board
Mouse port Keyboard port
IBM 6868 System Rear View
The SCSI controller board ships in this slot and
will be moved later to slot below the AGP slot.