Product specifications

6-4
Changing System BIOS and Creating Windows 2000 Image
To change the boot sequence:
1. Turn on the system using the Power button and press F1 when
asked for at the IBM logo.
You are placed into the system BIOS at the Configuration/Setup
menu (Main menu) after the execution of the SCSI BIOS because
you pressed F1 or the system placed you there.
2. Press the Down Arrow key to reach the Start Options menu
selection and press Enter.
The Start Options menu appears.
3. You are automatically placed at the Startup Sequence selection.
Press Enter.
4. Press the arrow keys to select the following startup devices under
the Primary Startup Sequence section:
- First startup — Diskette (floppy) drive 0
-Second startup — CD-ROM
- Third startup — Hard disk 0
5. Press the Esc key twice to return to the Main menu.
6. Press the Down Arrow key to reach Exit Setup and press Enter.
c
Never turn off the system while the BIOS is being updated; your
system might not restart (reboot) correctly. If this occurs, see the
User Guide IntelliStation M Pro Type 6868 Professional
Workstation to recover from a BIOS update failure.
7. Save and exit the system BIOS settings as explained on the screen.
After the BIOS settings are written, the system starts to reboot from
the beginning.
8. As the system starts to reboot, turn off the system using the Power
button.