Product specifications

7-2
Installing and Verifying Avid System Software
Installation Overview
The Windows 2000 operating system is now installed. You now need
to do the following:
• Install the Avid system software — Find the application CD-ROM
for your system (not the Avid Product Recovery CD-ROM).
• Install, and activate if needed, the following software:
- Install the necessary device drivers for your SCSI and F/C
disk boards. Find the floppy disks that contain the drivers for
your disk boards.
- Install and activate the display controller board driver.
• Verify that all drivers were installed and started by the system.
• Test the system.
• Test the Avid software.
• Create a Windows 2000 Emergency Repair Disk (ERD)
• Uninstall the Avid application.
• Understand antivirus applications
Installing the Avid System Software
Use the release notes for your specific Avid Xpress system to install
the Avid system software. Note the recommendations that suggest:
• Which partition you place the application and data files
•That you do not restart the system when asked
• That you close the Install Wizard window when complete