Product specifications

7-5
Installing the EDC Display Controller Driver
Setting Your Screen Resolution
You installed the proper screen resolution when you installed the
Avid Product Recovery CD-ROM, and you don’t need to change it.
However, the following procedure explains how to change the
resolution for dual monitors if needed. Avid recommends using a
Desktop Area of 1024 x 768 pixels for each monitor and a Refresh
Frequency of 75 Hz as your screen resolution.
To change the resolution in your monitor display properties:
1. Right-click the desktop and select Properties.
The Display Properties dialog box appears.
2. Click the Settings tab.
Two numbers (1 and 2) appear, representing two monitors.
3. Click either 1 or 2.
4. In the Screen Area, drag the slider to the proper resolution and
frequency (normally, 1024 x 768).
5. Under Colors, select True Colors (32 bit), click Apply, click OK,
click Yes, and then click OK.
6. Click the Advanced button in the Screen Area.
7. Click the Monitor tab.
8. Choose 75 Hertz from the Refresh Frequency pop-up menu.
9. Click OK.
10. Click Apply, click OK, click Yes, and then click OK.
11. Select and activate the second monitor, select “Extend my
Windows desktop to this monitor,” and then click Apply.
12. Repeat steps 3 to 10 for the remaining other monitor in the Display
Properties dialog box.
13. Close the Display Properties dialog box.