Specifications

QUADRAPADDLE SIGNAL CONTACTS AND MODULES USER’S MANUAL: APPENDIX VIRGINIA PANEL CORPORATION
1 of 6 For more information visit vpc.com Rev. 5 – 9/22/09
QuadraPaddle Connector
1. Scope
1.1 Content
This specification covers the performance, tests and quality requirements for the QuadraPaddle
Connector and connector system. This contact is a separable electrical connection device for
mating to a .025 inch round or square post. The crimped type of contact can be used with 22 to
30 AWG wire sizes. QuadraPaddle contacts are to be used with connector modules with .100
inch centerline spacing.
1.2 Qualification Testing
When tests are performed on subject product line, the following procedures shall be used:
All inspections shall be performed using applicable inspection plans and product drawings. Upon
completion of qualification testing, this specification will be assigned a number and be classified,
as a Product Qualification Report which will be identified in section 2.
2. Applicable Documents
2.1 Content
The following documents form a part of this specification to the extent specified herein. Unless
otherwise specified, the latest edition of the document applies. In the event of a conflict between
requirements of this specification and product drawing, product drawing will take precedence. In
the event of a conflict between requirements of this specification and referenced documents, this
specification shall take precedence.
2.2 Documents
A. EIA Standards
• EIA-264-05
• EIA-264-06
• EIA-264-09
• EIA-264-13
• EIA-264-17
• EIA-264-20
• EIA-264-21
• EIA-264-29
B. Qualification Test Plan
• 2003-116
C. Product Qualification Report
• VPC Test Report #2003-117
• VPC Test Report #2009-208
D. Product Drawings
Housings
• 510150130
• 510150115
• 510150105
Product Performance Specifications