User's Manual

Basic operation - Parent unit
Overview - Parent unit
Overview - Baby unit
1 LCD display
2 Antenna
3 LED lights
4 Microphone
5 POWER
6 TALK
7 Arrow keys
8 MENU/SELECT
9 Power jack
10 VOL - / VOL +
11 VIEW /LCD ON/OFF
12
/EXIT
13 Speaker
14 Battery compartment
cover
15 Stand
Need help?
Zoom
Press to zoom in or out.
Talk to your baby unit
Press and hold TALK and speak to your
parent unit. Your voice is transmitted to
the baby unit. Release TALK when finish
talking and hear your baby again.
Turn off the screen
Press and hold LCD ON/OFF to switch off
the screen. You can still hear sound from the
baby unit.
Tip
• Press any keys on the parent unit to turn
on the screen again.
Use the menu
Press to enter the menu, choose a menu item, or save a
setting. You can use the parent unit for advanced settings or
operations, such as to play or stop the baby unit lullaby, or to
adjust the baby unit sound sensitivity.
While in the menu:
• Press or to scroll among the menu options.
• Press to select an item, or to save a setting.
• Press or to scroll among the sub-menus,
or to adjust a setting.
• Press to return to the previous menu options without
changing the current setting.
• Press /EXIT to return to live video.
4
Status check
3
Positioning the baby monitor
Caution
• The default volume of your parent unit is level
4, and the maximum volume is level 7. If you
experience high-pitched screeching noise from
your baby monitor while positioning:
- Make sure your baby unit and parent unit are more
than 3 feet (1 meter) apart, OR
- Lower the volume of your parent unit.
NOTESNOTE
Note
• To avoid interference from other electronic devices,
place your baby monitor at least 3 feet (1 meter) away
from devices such as wireless routers, microwaves, cell
phones and computers.
Once you power on both your
baby unit and parent unit, your
parent unit displays image from
the baby unit, and the LINK LED
light turns on.
The POWER LED light of baby unit
turns on.
Parent unit icons
Main
menu
Sub-menu
Brightness
• Adjust the parent unit’s LCD brightness.
Camera settings
Baby unit speaker volume
• Adjust the baby unit’s speaker
volume.
Monitoring mode (For VM350-2 only)
• Single mode
• Split mode
• Patrol mode
Lullaby
/
Play/Stop lullaby
• Select one of the soothing sounds, or
white noise.
• Select one of the five melodies.
• Play all melodies.
• Set timer to stop playing the selected
melody or soothing sound.
Main
menu
Sub-menu
Alert tones
• Set the parent unit to beep when
the battery is low.
• Set the parent unit to beep when
the link between the parent unit
and the baby unit is lost.
• Set the confirmation tone on or
off when selecting an option in
the menus.
• Set the parent unit to beep when
the baby unit detects sounds while
in Split mode (For VM350-2 only).
/
• Turn on/off the alert vibration.
Temperature
/
• Turn on/off temperature alert tone.
• Set the parent unit to beeps whenever the
room temperature detected by the baby
unit falls outside of the set temperature
range.
• Set the minimum temperature.
• Set the maximum temperature.
• Set temperature display in Fahrenheit (
o
F)
or Celsius (
o
C)
Main
menu
Sub-menu
Sound activation - screen and audio
/
Turn on/off sound activation
• Set sound activation on or off.
• When it is on, and the baby unit detects
no sound, the parent unit screen stays off
to save power. Once a sound is detected,
the parent unit screen and speaker turns
on automatically, and you can see and
hear your baby. The parent unit will then
turn off again after 50 seconds of no
sound detection.
NOTESNOTE
Note
• When the parent unit screen is off and
it receives alerts, for example, link lost
between parent unit and baby unit, or
battery is low, the parent unit screen and
speaker will turn on for 10 seconds.
VOX (Voice Activated Alert) Sensitivity
• You can set VOX sensitivity level to
activate parent unit screen and sound
when baby unit detects sounds that
exceed certain levels. See Sound
sensitivity and sound activation section.
Main menu icons
For operations and guides to help you using your video monitor, and
for latest information and supports, go and check the online help topics
and online FAQs.
Use your smartphone or mobile device to access our online help.
• Go to https://help.vtechphones.com/vm350 or
https://help.vtechphones.com/vm350-2; OR
• Scan the QR code on the right. Launch the camera app or QR code scanner app on
your smartphone or tablet. Hold the device’s camera up to the QR code and frame
it. Tap the notification to trigger the redirection of the online help.
- If the QR code is not clearly displayed, adjust your camera’s focus by moving
your device closer or further away until it is clear.
You can also call our Customer Support at 1 [phone] [in US] or
1 [phone] [in Canada] for help.
VM350
S
m
VM350-2
Caution
• Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the
baby’s crib or playpen.
Specifications are subject to change without notice.
© 2020 VTech Communications, Inc. All rights reserved.
11/20. VM350-X_QSG_V5.
VM350
VM350-2
Full Color Video Monitor
Go to www.vtechphones.com
to register your product for enhanced
warranty support and the latest VTech
product news.
Technical specifications
Credits:
The Background Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The Stream Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The Crickets At Night sound file was created by Mike Koenig, and is used under the Creative Commons license.
The Heart Beat sound file was created by Zarabadeu, and is used under the Creative Commons license.
Frequency control Crystal controlled PLL synthesizer
Transmit frequency Baby unit: 2405 - 2475 MHz
Parent unit: 2405 - 2475 MHz
Channels 32
LCD 5” Color LCD
(WQVGA 480x272 pixel)
Nominal effective range Maximum power allowed by FCC and IC. Actual operating range
may vary according to environmental conditions at the time of use.
Power requirements Baby unit power adapter: Output: 6V DC @ 400mA
Parent unit power adapter: Output: 5V DC @ 1A
Parent unit battery: 3.8V 2100mAh Li-ion battery
Quick start guide
VM350
VM350-2
For more support information
S
m
Important safety instructions
The applied nameplate is located at the bottom of the baby
unit’s base.
When using your equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and
injury, including the following:
1. Follow all warnings and instructions marked on the product.
2. Adult setup is required.
3. CAUTION: Do not install the baby unit at a height above 2
meters.
4. This product is not a substitute for adult supervision of the
infant. Supervising the infant is the parent’s or caregiver’s
responsibility. This product could cease operating, and
therefore you should not assume it will continue working
properly for any given period of time. Further, this is not a
medical device and should not be used as such. This product
is intended to assist you in supervising your baby.
5. Do not use this product near water. For example, do not use
it next to a bath tub, wash bowl, kitchen sink, laundry tub or
swimming pool, or in a wet basement or shower.
6. CAUTION: Use only the batteries provided. There may be
a risk of explosion if a wrong type of battery is used for the
parent unit. The batteries cannot be subjected to high or low
extreme temperature and low air pressure at high altitude
during use, storage or transportation. Disposal of batteries
into fire or a hot oven, or mechanically crushing or cutting or
the batteries can result in an explosion. Leaving the batteries
in an extremely high temperature surrounding environment
can result in an explosion or the leakage of flammable liquid
of gas. Batteries subjected to extremely low air pressure may
result in an explosion or the leakage of flammable liquid or
gas. Dispose of used battery according to the information
in The RBRC seal.
6. Use only the adapters included with this product. Incorrect
adapter polarity or voltage can seriously damage the
product.
7. Use only adaptors and batteries listed below.
Power adapter information:
VTech Telecommunications Ltd.
Model : VT05EUS06040 (Baby unit); VT05EUS05100
(Parent unit).
Rechargeable batteries information:
ZHONGSHAN TIANMAO BATTERY CO., LTD
3.8V 2100mAh Li-ion Battery (Model: I9300)
8. The power adapters are intended to be correctly oriented in a
vertical or floor mount position. The prongs are not designed
to hold the plug in place if it is plugged into a ceiling, under-
the-table or cabinet outlet.
9. For pluggable equipment, the socket-outlet shall be installed
near the equipment and shall be easily accessible.
10. Unplug this product from the wall outlet before cleaning.
Do not use liquid or aerosol cleaners. Use a damp cloth for
cleaning.
11. Unplug the power cords before replacing batteries.
12. Do not cut off the power adapters to replace them with other
plugs, as this causes a hazardous situation.
13. Do not allow anything to rest on the power cords. Do not
install this product where the cords may be walked on or
crimped.
14. This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supply in your home, consult your dealer
or local power company.
15. Do not overload wall outlets or use an extension cord.
16. Do not place this product on an unstable table, shelf, stand
or other unstable surfaces.
17. This product should not be placed in any area where proper
ventilation is not provided. Slots and openings in the back or
bottom of this product are provided for ventilation. To protect
them from overheating, these openings must not be blocked
by placing the product on a soft surface such as a bed, sofa
or rug. This product should never be placed near or over a
radiator or heat register.
18. Never push objects of any kind into this product through
the slots because they may touch dangerous voltage points
or create a short circuit. Never spill liquid of any kind on the
product.
19. To reduce the risk of electric shock, do not disassemble this
product, but take it to an authorized service facility. Opening
or removing parts of the product other than specified access
doors may expose you to dangerous voltages or other risks.
Incorrect reassembling can cause electric shock when the
product is subsequently used.
20. You should test the sound reception every time you turn on
the units or move one of the components.
21. Periodically examine all components for damage.
22. There is a very low risk of privacy loss when using certain
electronic devices, such as baby monitors, cordless
telephones, etc. To protect your privacy, make sure the
product has never been used before purchase, reset the baby
monitor periodically by powering off and then powering on
the units, and power off the baby monitor if you will not use
it for some time.
23. Children should be supervised to ensure that they do not
play with the product.
24. The product is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
SAVE THESE INSTRUCTIONS
Cautions
1. Use and store the product at a temperature between 32
o
F
and 104
o
F.
2. Do not expose the product to extreme cold, heat or direct
sunlight. Do not put the product close to a heating source.
3. Batteries should not be exposed to excessive heat such as
bright sunshine or fire.
4. Warning—Strangulation Hazard—Children
have STRANGLED in cords. Keep this cord out
of the reach of children (more than 3 ft (0.9 m)
away). Do not remove this tag.
5. Never place the baby unit inside the baby’s crib or playpen.
Never cover the baby unit or parent unit with anything such
as a towel or a blanket.
6. Other electronic products may cause interference with your
baby monitor. Try installing your baby monitor as far away
from these electronic devices as possible: wireless routers,
radios, cellular telephones, intercoms, room monitors,
televisions, personal computers, kitchen appliances and
cordless telephones.
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless devices):
Wireless Technology Research, LLC (WTR), an independent
research entity, led a multidisciplinary evaluation of the
interference between portable wireless devices and implanted
cardiac pacemakers. Supported by the U.S. Food and Drug
Administration, WTR recommends to physicians that:
Pacemaker patients
• Should keep wireless devices at least six inches from the
pacemaker.
• Should NOT place wireless devices directly over the
pacemaker, such as in a breast pocket, when it is turned ON.
WTR’s evaluation did not identify any risk to bystanders with
pacemakers from other persons using wireless devices.
Electromagnetic fields (EMF)
This VTech product complies with all standards regarding
electromagnetic fields (EMF). If handled properly and
according to the instructions in this user’s manual, the product is
safe to be used based on scientific evidence available today.
1
Connect the baby monitor
2
Power on or off the baby monitor
What’s in the box
Install the battery
The parent unit runs on rechargeable battery or AC power. To continuously monitor your
baby, make sure you use both battery and AC power at the same time. With the battery
alone, the parent unit can cordlessly run for a short time only.
NOTESNOTE
Notes
• Use only the battery supplied with this product.
• If the parent unit will not be used for a long time, disconnect and remove the battery to prevent
possible leakage
Replace the battery
To replace the battery, press down on the battery compartment cover and pull it out, then
follow the steps above to install the battery.
Press down on the battery
compartment cover to pull it out.
Make sure the label THIS SIDE UP is
facing up while inserting the battery.
Connect the baby monitor
NOTESNOTE
Notes
• Use only the power adapters supplied with this product.
• Make sure the baby monitor is not connected to the switch controlled electric outlet.
• Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are
not designed to hold the weight of baby monitor, so do not connect them to any ceiling, under-
the-table, or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets.
• Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children.
Charge the parent unit battery
When you have connected and turned on the parent unit, the battery will be charged
automatically.
NOTESNOTE
Notes
• Before using the baby monitor for the first time, charge the parent unit battery for 12 hours. When
the parent unit battery is fully charged, the battery icon becomes solid .
• It takes longer to charge the battery when the parent unit is turned on. To shorten the charging time,
turn the parent unit off while charging.
• The standby time varies depending on the sensitivity level you set, your actual use and the age of
the battery.
Slide the ON/OFF switch
to power on or off your
baby unit.
Press and hold POWER to power on or off your
parent unit.
1
2
THIS SIDE UP
3
Strangulation
Hazard
Ke
ep this
c
or
d ou
t of
rea
c
h of
ch
i
ldren.
Th
e
c
ord
n
eeds
t
o be at
l
e
as
t
three feet
awa
y f
r
om
t
he ch
i
ld a
t
a
l
l times. Do not
us
e wi
t
h
a
n ex
tens
i
o
n cord.
Do
no
t
remov
e t
his
t
ag
.
É
loigne
z ce co
r
do
n des e
n
f
a
nt
s.
L
e
c
o
r
do
n doit
se
tr
o
uver à
a
u moins
tr
ois
pieds
d’
u
n enfant
e
t
c
e
,
en
tout
temps
.
N’uti
lisez
p
a
s
de
rall
o
nge. Ne r
et
ir
e
z
pa
s
ce
t
te
éti
qu
et
te
.
Manteng
a e
ste ca
bl
e
fuera
de la alc
an
ce
de
los
niño
s.
E
ste cable de
be
est
ar
por
lo m
e
nos
t
r
e
s pi
e
s fuera
de l
a
a
l
c
anc
e
de
l
niño e
n todo
moment
o.
No
lo us
e
co
n una e
x
t
en
sión i
n
alámbr
ic
a.
No qu
i
te
esta
e
t
iquet
a
.
Risq
ue
d
’étranglement
Riesgo de
est
rangulación
Strangulation
Hazard
Keep this cord out of reach of children.
The cord needs to be at least three feet
away from the child at all times. Do not
use with an extension cord. Do not
remove this tag.
Éloignez ce c
ordon des enfants. Le
cordon doit s
e trouver à au moins trois
pieds d’un enfant et ce, en tout temps.
N’utilisez pas de rallonge. Ne retirez pas
cette étiquette.
Mantenga este cable fuera de la alcance
de los niños. Es
te cable debe estar por
lo menos tres pies fuera de la alcance
del niño en todo momento. No lo use
con una extensión inalámbrica. No quite
esta etiqueta.
Risque
d’étranglement
Riesgo de
estrangulación
Strangulation
Hazard
Keep this cord out of reach of children.
The cord needs to be at least three feet
away from the child at all times. Do not
use with an extension cord. Do not
remove this tag.
Éloignez ce cordon des enfants. Le
cordon doit se trouver à au moins trois
pieds d’un enfant et ce, en tout temps.
N’utilisez pas de rallonge. Ne retirez pas
cette étiquette.
Mantenga este cable fuera de la alcance
de los niños. Este cable debe estar por
lo menos tres pies fuera de la alcance
del niño en todo momento. No lo use
con una extensión inalámbrica. No quite
esta etiqueta.
Risque
d’étranglement
Riesgo de
estrangulación
Strangulation
Hazard
Keep this cord out of reach of children.
The cord needs to be at least three feet
away from the child at all times. Do not
use with an extension cord. Do not
remove this tag.
Éloignez ce cordon des enfants. Le
cordon doit se trouver à au moins trois
pieds d’un enfant et ce, en tout temps.
N’utilisez pas de rallonge. Ne retirez pas
cette étiquette.
Mantenga este cable fuera de la alcance
de los niños. Este cable debe estar por
lo menos tres pies fuera de la alcance
del niño en todo momento. No lo use
con una extensión inalámbrica. No quite
esta etiqueta.
Risque
d’étranglement
Riesgo de
estrangulación
Quick start guide
1 set for VM350
2 sets for VM350-2
Long press
Power off
Long press
Power on
>
3ft (1m)
<
3ft (1m)
≥
<
3ft (1m)
3ft (1m)
﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏
﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏
63ē
Adjust speaker volume
Press VOL+ / VOL- to adjust your parent unit
speaker volume.
63

63ē
Long press
6
7
8
9
4
5
3
2
10
11
12
1
13
14
15
1 Pair hole
• Your baby units and parent unit
provided are already paired.
2 POWER LED light
• On when the baby unit is turned
on and is paired to the parent
unit.
• Flashes when the baby unit is
not being viewed;
or when the link to the parent
unit is lost.
3 Microphone
4 Camera
5 Infrared LEDs
6 Light sensor
7
ON/OFF switch
• Slide to turn on or off the baby
unit.
8 Speaker
9 Power jack
10 Wall mount holes
1
3
4
5
2
6
8
9
7
10
> 3ft (1m)
63ē
Long press