Owner`s manual

ManualsBrandsVTech ManualsCordless Telephone20-2432

IMPORTANT:

The 20-2422 is an Accessory Handset for use with the 20-2432 system. You

must have the 20-2432 in order to use this 20-2422 Accessory Handset.

This manual is designed to familiarize you with the 20-2422 Accessory Handset

setup, registration and basic functions. For detailed operational instructions, please

refer to the 20-2432 Owner's Manual.

To order additional system Handsets (model# 2422), battery packs, or headsets,

call SPRINT NATIONAL HELP DESK at 1-800-949-4357; or visit one of Sprint's

conveniently located Retail stores.

IntroductionIntroduction

Introduction

OWNER'S MANUAL

2.4GHz DIGITAL SPREAD SPECTRUM

CORDLESS TELEPHONE SYSTEM

National Help Desk Call Sprint

TOLL FREE AT 1-800-949-4357

Accessory Handset For Use With 20-2432 System

Summary of content (10 pages)

PAGE 1
Introduction IMPORTANT: OWNER'S MANUAL 2.4GHz DIGITAL SPREAD SPECTRUM CORDLESS TELEPHONE SYSTEM The 20-2422 is an Accessory Handset for use with the 20-2432 system. You must have the 20-2432 in order to use this 20-2422 Accessory Handset. This manual is designed to familiarize you with the 20-2422 Accessory Handset setup, registration and basic functions. For detailed operational instructions, please refer to the 20-2432 Owner's Manual.
PAGE 2
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons , including the following: 12. Unplug this product from the wall outlet and refer servicing to a Sprint authorized service facility under the following conditions: A. When the power supply cord or plug is damaged or frayed. 1. 2. 3. Read and understand all instructions. B. If liquid has been spilled into the product.
PAGE 3
Getting Started Setup Registration And Operation Of The 20-2422 Accessory Handset The accessory Handset consists of the following: Installation of Battery Pack in Handset Your 2-Line 20-2432 system can operate up to 8 Handsets. The original Handset that is shipped with your 2-Line system will be automatically registered to the Base. This Handset is HANDSET 1.
PAGE 4
Registration The Handset Layout Enter Base ID Code 1. After charging the Handset, remove it from its Charge Cradle; the screen will display: OK alternating with this screen: 2. If, after charging the Handset, you see: 3. Press NEW. You will now see the ENTER BASE ID screen as described in step 1. 11 12 MENU 4. 14 15 Find the BASE ID Code by doing the following: (the Base must be in idle (OFF) mode) 16 A. At the Base, press MENU B. Scroll down to DISPLAY BASE-ID C. Press OK.
PAGE 5
Handset Operation Handset Indicators Handset Icons Icon 1 Description 2 Line In Use indicator On steady with no number next to it when a parallel set is in use. On steady with one or more numbers next to it, indicating which extensions are using the line. For example, 1 12 indicates that Handset 1 and Handset 2 are on an outside call using Line 1. Additional Information Your 2-Line cordless Handset is equipped with a 2.
PAGE 6
In Case Of Difficulty Maintenance Taking Care Of Your Telephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the Handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water If you have difficulty operating your phone, the suggestions below should solve the problem.
PAGE 7
Warranty Statement In Case Of Difficulty them to ring. Try unplugging some of the other phones. You Hear Other Calls While Using Your Phone • Disconnect your Base Unit from the telephone jack, and plug in a regular telephone. If you still hear other calls, the problem is probably in your wiring or local service. Call your local telephone company. You Hear Noise In The Handset, And None Of The Keys Or Buttons Work • Make sure the power cord is plugged in.
PAGE 8
FCC, ACTA and IC Regulations This equipment complies with Parts 15 of the Federal Communications Commission (FCC) rules for the United States. It also complies with regulations RSS210 and CS-03 of Industry and Science Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
PAGE 9
FCC, ACTA and IC Regulations 3. 4. Repair instructions IC (Industry Canada) If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited Warranty. This telephone is registered for use in Canada.
PAGE 10
Technical Specifications FREQUENCY CONTROL WEIGHT Crystal controlled PLL synthesizer Handset : Charger : TRANSMIT FREQUENCY POWER REQUIREMENTS 2401.056 - 2481.408 MHz RECEIVE FREQUENCY Handset : 2.4V 1500mAh NiMH or 2.4V 800mAh Ni-Cd Battery Pack Charger : 6 VDC @ 300mA 2401.056 - 2481.408 MHz CHANNELS 94 Channels NOMINAL RANGE 122 grams (excluding battery pack) 170 grams MEMORY EFFECTIVE Maximum power allowed by FCC and IC.