User’s manual www.vtechphones.
Congratulations on purchasing your new VTech product. Before using this telephone, please read Important safety instructions on page 51 of this manual. This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech telephone. Please review this manual thoroughly to ensure proper installation and operation of this innovative and feature rich VTech product. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com.
Table of contents Getting started . . . . . . . . . . . . . . . . . 1 Parts checklist . . . . . . . . . . . . . . . . . . 1 Telephone base and charger installation . . . . . . . . . . . . 2 Battery installation . . . . . . . . . . . . . . . 3 Battery charging . . . . . . . . . . . . . . . . 4 Installation options . . . . . . . . . . . . . . . 5 Tabletop to wall mount installation . . 5 Wall mount to tabletop installation . . . 6 Telephone base layout . . . . . . . . . . .
Table of contents View dialing options . . . . . . . . . . . . . 37 Save a caller ID log entry to the directory . . . . . . . . . . . . . . . . . 38 Delete the caller ID log entries . . . . 39 Caller ID log screen messages . . . . 39 Appendix . . . . . . . . . . . . . . . . . . . . 40 Expand your telephone system . . . . 40 Add and register a handset . . . . . . 40 Replace a handset . . . . . . . . . . . . . . 41 Screen messages . . . . . . . . . . . . . .
Getting started Parts checklist Your telephone contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.
Getting started Telephone base and charger installation Install the telephone base and charger as shown below. If you subscribe to digital subscriber line (DSL) high-speed Internet service through your telephone line, you must install a DSL filter between the telephone line cord and telephone wall jack. Contact your DSL service provider for more information about DSL filter. Telephone wall jack A DSL filter (not included) is required if you have DSL high-speed Internet service.
Getting started Battery installation Install the battery as shown below. 1. Plug the battery connector securely into the socket, matching the orientation of the engraved label. 2. Place the battery with the label THIS SIDE UP facing up and the wires inside the battery compartment. 3. Slide the battery compartment cover towards the center of the handset until it clicks into place. 4. Place the handset in the telephone base or charger to charge. CHARGE light remains on when charging.
Getting started Battery charging Once you have installed the battery, the screen indicates the battery status (see the table below). • For best performance, keep the handset in the telephone base or charger when not in use. • The battery is fully charged after 11 hours of continuous charging. • If you place the handset in the telephone base or the charger without plugging in the battery, the screen displays NO BATTERY.
Getting started Installation options The telephone comes ready for tabletop use. If you want to mount your telephone on a wall, use the provided wall mount bracket to connect with a standard dual-stud telephone wall mount plate. If you do not have this wall mount plate, you can purchase one from many hardware or consumer electronics retailers. You may need a professional to install the wall mount plate. Tabletop to wall mount installation 1.
Getting started Wall mount to tabletop installation 1. If the telephone line cord and power adapter cord are bundled, untie them first. 2. Slide the wall mount bracket up and remove it from the wall mount plate. Unplug the telephone line cord (or DSL filter) from the telephone wall jack. Unplug the power adapter from the power outlet. 3. Slide the telephone base up and remove it from the wall mount bracket. 4. See Telephone base and charger installation on page 2.
Getting started Telephone base layout IN USE light • Flashes when there is an incoming call, or another telephone sharing the same line is in use. • Flashes when handsets are being deregistered. • On when a handset is in use. • On when a handset is being registered. /FIND HANDSET • Press to page all system handsets (page 23).
Getting started Handset layout CHARGE light • On when the handset is charging in the telephone base or charger (page 3). / / VOLUME • Press to review the directory when the phone is not in use (page 30). • During a call, press to increase the listening volume (page 19). • Press to scroll up while in a menu, or reviewing the directory, caller ID log or redial list. • While entering numbers or names in the directory, press to move the cursor to the right.
Getting started Handset layout CID/ /VOLUME • Press to review the caller ID log when the phone is not in use (page 36). • During a call, press to decrease the listening volume (page 19). • Press to scroll down while in a menu, or reviewing the directory, caller ID log or redial list. • While entering numbers or names in the directory, press to move the cursor to the left. MENU/SELECT • Press to show the menu (page 10). • While in a menu, press to choose an item, or save an entry or setting.
Telephone settings Using the menu You can use a cordless handset to change the telephone settings. In the ringers menu, you can select the ringer tones and adjust the ringer volume for incoming calls. In the settings menu, you can change the settings for LCD language, voicemail number, voicemail indicators, key tone, home area code and dial mode. To enter the handset menu: 1. Press MENU when the phone is not in use. 2. Press or until the handset displays the desired feature menu. 3.
Telephone settings Ringer tone You can choose from different ringer tones on each handset. 1. Press MENU when the handset is not in use. 2. Press or until the handset displays Ringers, then press SELECT. 3. Press or until the handset displays Ringer tone, then press SELECT. 4. The handset displays Tone: with the current setting displayed. Press or to sample each ringer tone. 5. Press SELECT to save your selection. You hear a confirmation tone.
Telephone settings Set date and time I f you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. You can also set the date and time manually. 1. Press MENU when the handset is not in use. 2. Press or until the handset displays Set date/time, then press SELECT. 3. Press or to select the month then press SELECT, or use the dialing keys to enter a two-digit number (01-12). 4.
Telephone settings LCD language You can select English, French or Spanish to be used in all screen displays. 1. Press MENU when the handset is not in use. 2. Press or until the handset displays Settings, then press SELECT. Settings ECO 3. Press SELECT to choose LCD language. 4. Press or to choose English, Français or Español, then press SELECT. • The screen displays Set English? when you choose English. • The screen displays Set Francais? when you choose Français.
Telephone settings Voicemail number If you subscribe to voicemail service offered by your telephone service provider, you can save the voicemail number to 1 on each handset for easy access. When you want to retrieve voicemail messages, press and hold 1. Contact your telephone service provider for more information and assistance about using your voicemail service. To set your voicemail number: 1. Press and hold 1 when the phone is not in use. 2.
Telephone settings Clear voicemail If you subscribe to voicemail service offered by your telephone service provider, the handsets display New voicemail and when you have new voicemail messages. Contact your telephone service provider for more information about using your voicemail service. After you have listened to all new voicemail messages, the indicators on the handsets turn off automatically.
Telephone settings Key tone You can turn the key tone on or off for each handset. If you turn the key tone on, the handset beeps with each key press. If you turn the key tone off, there are no beeps when you press the handset keys. 1. Press MENU when the handset is not in use. 2. Press or until the handset displays Settings, then press SELECT. 3. Press or until the handset displays Key tone, then press SELECT. 4. Press or Settings ECO Key tone ECO Key tone:On to choose Key tone:On or Key tone:Off.
Telephone settings Dial mode The dial mode is preset to touch-tone dialing. If you have pulse (rotary) service, you must change the dial mode to pulse dialing before using the telephone to make a call. Settings ECO 1. Press MENU when the phone is not in use. 2. Press or until the handset displays Settings, then press SELECT. 3. Press or until the handset displays Dial mode, then press SELECT. 4. Press or to choose Touch-tone or Pulse. 5. Press SELECT to save your selection.
Telephone operation Make a call 1. Press or on the handset. 2. When you hear a dial tone, dial the number with the dialing keys (0-9). • The screen displays the elapsed time as you talk (in hours, minutes and seconds). • While entering numbers, press and hold PAUSE to insert a dialing pause (a P appears). Predial a call 1. Enter the number with the dialing keys (0-9). 2. Press or to dial. • The screen displays the elapsed time as you talk (in hours, minutes and seconds).
Telephone operation Volume During a call, press listening volume. /VOLUME or /VOLUME to adjust the When the volume reaches the minimum or maximum setting, you hear two beeps. The handset earpiece and speakerphone volume settings are independent. Mute The mute function allows you to hear the other party but the other party cannot hear you. • During a call, press MUTE. The handset displays Muted until the mute function is turned off. • Press MUTE again to resume the conversation.
Telephone operation Temporary tone dialing If you have pulse (rotary) service only, you can switch from pulse to touch-tone dialing temporarily during a call. This is useful if you need to send touch-tone signals to access your telephone banking or long distance services. 1. During a call, press TONE . 2. Use the dialing keys to enter the number. The telephone sends touch-tone signals. It automatically returns to pulse dialing mode after you end the call.
Telephone operation Check voicemail 1 to dial your voicemail number. Press and hold See Voicemail number on page 14. Chain dialing Use this feature to initiate a dialing sequence from numbers stored in the directory, caller ID log or redial list while you are on a call. Chain dialing can be useful if you wish to access other numbers (such as bank account numbers or access codes) from the directory, caller ID log or redial list. To access a number in the directory: 1. Press MENU while on a call. 2.
Telephone operation Web address Web address Use this feature to view the VTech website address. 1. Press MENU when the handset is not in use. 2. Press or until the handset displays Web address, then press SELECT. The handset displays the VTech website address. ECO www.vtechphones ECO Transfer a call .com While on an outside call, you can transfer the call from one handset to another. ECO 1. During a call, press MENU. 2. Press or to scroll to Transfer, then press SELECT.
Telephone operation Find handset Use this feature to find all system handsets. To start paging: • Press /FIND HANDSET on the telephone base when not in use. All idle handsets ring and display ** Paging **. To end paging: • Press /FIND HANDSET on the telephone base. -OR• Press , , OFF or any dialing key (0-9, TONE or QUIET#) on a handset. -OR• Place the handset in the telephone base or charger. • Do not press and hold /FIND HANDSET for more than 4 seconds. It may lead to handset deregistration.
Multiple handset use Join a call in progress You can use up to two handsets at the same time on an outside call. You can buy additional expansion handsets (CS6509/CS6509-14/CS6509-15/ CS6509-16) for this telephone base. You can register up to five handsets to the telephone base. To share an outside call: • When a handset is already on a call and you would like to join the call, press or on the other handset. • To exit the call, press OFF or place the handset in the telephone base or charger.
Multiple handset use Intercom Use the intercom feature for conversations between two handsets. You can buy additional expansion handsets (CS6509/CS6509-14/CS6509-15/CS6509-16) for this telephone base. You can register up to five handsets to the telephone base. 1. Press INT on your handset when not in use. • If you have only one handset, your handset displays INT needs 2 HS. • If you have two handsets, your handset displays Calling HS X.
Multiple handset use Call transfer using intercom Use the intercom feature to transfer an outside call to another system handset. 1. During a call, press INT. Intercom to ECO • If you have two handsets, the outside call is put on hold and your handset displays Calling HS X. • If you have three or more handsets, your handset displays Intercom to. Use the dialing keys to enter a handset number. The outside call is put on hold and your handset displays Calling HS X.
Directory About the directory The directory can store up to 50 entries which are shared by all system handsets. Each entry may consist of a phone number up to 30 digits and a name up to 15 characters. • Directory entries are shared by all system handsets. Any modifications made on one handset apply to all system handsets. • When you access the directory without records, the screen displays Directory empty. • When the directory is full and you try to save an entry, the screen displays Directory full.
Directory Add a directory entry 1. Press MENU when the phone is not in use. 2. Press Directory to scroll to Directory, then press SELECT. or ECO 3. Press SELECT to choose Add contact. 4. When Enter number displays, use the dialing keys to enter a number (up to 30 digits). • Press or Add contact to move the cursor to the left or right. ECO • Press DELETE to backspace and erase a digit. • Press and hold DELETE to erase all digits.
Directory Add a directory entry -OR1. Use the dialing keys to enter a number (up to 30 digits) when the phone is not in use. Press SELECT. The handset displays Enter number. • Press or Enter number 800-595-9511ECO to move the cursor to the left or right. • Press DELETE to backspace and erase a digit. • Press and hold DELETE to erase all digits. • Press and hold PAUSE to enter a dialing pause (a P appears). -OR- Enter name ECO Mike_ Copy a number from the redial list by pressing REDIAL.
Directory Review and dial from the directory Entries are sorted alphabetically. 1. Press when the phone is not in use. The handset displays Entries in DIR X and then the first entry in the directory. 2. Press press or to browse. When the desired entry displays, or to dial. -OR- Review ECO Entries in DIR 1. Press MENU when the phone is not in use. 2. Press or to scroll to Directory then press SELECT. 3. Press or to scroll to Review and then press SELECT.
Directory Edit a directory entry 1. Search for the desired entry in the directory (see Review and dial from the directory or Alphabetical search on page 30). 2. When the desired entry appears, press SELECT. The handset displays Edit number and the stored number. 3. Use the dialing keys to edit the number. Edit number 800-595-9511_ ECO • Press DELETE to backspace and erase a digit. • Press and hold DELETE to erase the entire entry. • Press or to move the cursor to the left or right.
Directory Speed dial You can copy up to 9 directory entries into the speed dial locations (0 and 2-9) so that you can dial these numbers using fewer keys than usual. The speed dial memory locations are stored in the telephone base and are shared by all handsets. Changes made to the speed dial entries on one handset apply to all. Assign a speed dial entry 1. Press MENU when the phone is not in use. 2. Press or to scroll to Directory, then press SELECT. 3.
Directory Reassign a speed dial entry 1. Press MENU when the phone is not in use. 2. Press or to scroll to Directory, then press SELECT. 3. Press or to scroll to Speed dial, then press SELECT. 4. Press or , or use the dialing keys to choose the speed dial location you want to reassign. 5. Press SELECT twice. The handset displays Reassign SD. 6. Press SELECT. The handset displays Copy from DIR... and then the first entry of the directory. 7. Press or to browse to the desired entry.
Caller ID About caller ID This product supports caller ID services provided by most telephone service providers. Depending on your service subscription, you may see the caller’s number, or the caller’s name and number that are sent by your telephone service provider after the first or second ring. Caller ID allows you to see the name, number, date and time of calls.
Caller ID Caller ID log If you subscribe to caller ID service, information about each caller will appear after the first or second ring. If you answer a call before the caller information appears on the screen, it will not be saved in the caller ID log. • The caller ID log stores up to 50 entries. Each entry has up to 24 digits for the phone number and 15 characters for the name. If the telephone number has more that 15 digits, only the last 15 digits appear.
Caller ID Memory match When the incoming telephone number matches the last seven digits of a telephone number in your directory, the name that appears on the screen matches the corresponding name in your directory. For example, if Linda Jones calls, her name appears as Linda if this is how you entered it into your directory. The number shown in the caller ID log is in the format sent by the telephone service provider.
Caller ID View dialing options Although the caller ID log entries received have 10 digits (the area code plus the seven-digit number), in some areas, you may dial only the seven digits, or a 1 plus the seven digits, or a 1 plus the area code plus the seven digits. You can change the number of digits that you dial from the caller ID log and store the new number to the directory.
Caller ID Save a caller ID log entry to the directory 1. Press CID when the phone is not in use. -ORPress MENU when the phone is not in use. Press Then press SELECT twice. or to scroll to Caller ID log. 2. When the desired entry appears, press SELECT. The handset displays Edit number and the stored number. 3. Use the dialing keys to edit the number. Edit number 800-595-9511_ ECO • Press DELETE to backspace and erase a digit. • Press and hold DELETE to erase the entire entry.
Caller ID Delete the caller ID log entries To delete an entry: 1. When in the caller ID log, press or to browse. 2. Press DELETE to delete the selected entry. The handset displays Deleting... and then you hear a confirmation tone. To delete all entries: 1. Press MENU when the phone is not in use. Delete all? 2. Press or to scroll to Caller ID log, then press SELECT. 3. Press or to scroll to Del all calls, then press SELECT. ECO 4. Press SELECT to confirm. The handset displays Deleting...
Appendix Expand your telephone system Your telephone base can support up to five handsets. Each handset must be registered to the telephone base before use. The handsets provided within your product package are already registered as HANDSET 1 and so forth. You can add new handsets (CS6509/CS6509-14/CS6509-15/CS6509-16, purchased separately) to your telephone base. Additional handsets are assigned numbers in the sequential order they are registered (up to HANDSET 5).
Appendix Replace a handset If you want to replace a handset, or reassign the designated handset number of a registered handset, you must deregister all handsets that are registered to the telephone base. Then register each handset individually. To make deregistration easier, read all of the instructions below before you begin. To deregister all handsets: 1. Press and hold /FIND HANDSET on the telephone base for about 10 seconds until the IN USE light on the telephone base turns on and starts to flash. 2.
Appendix Screen messages Call log empty There are no caller ID log entries. Calling HS X (for models with two or more handsets only) You are calling another handset (for intercom calls). Contact deleted A directory entry is deleted. Directory empty There are no directory entries. Directory full The directory is full. You cannot save any new entry unless you delete some current entries. Ended You have just ended a call. Failed The handset registration is not successful.
Appendix Screen messages Number repeated The telephone number you have entered is already stored in the directory. Out of range or no pwr at base The telephone base has lost power, or the handset is out of range. Phone The handset is on a call. Put in charger The battery is very low. Put the handset in the telephone base or charger for recharging. Quiet mode on The quiet mode is turned on. Quiet mode off The quiet mode is turned off. Registering... The handset registration is in progress.
Appendix Handset and telephone base indicators Handset lights On when the handset speakerphone is in use. CHARGE On when the handset is charging in the telephone base or charger. Telephone base lights IN USE On when the telephone line is in use. On when you are registering a handset. Flashes quickly when there is an incoming call. Flashes when another telephone sharing the same line is in use. Flashes when you are deregistering all handsets.
Appendix Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For customer service, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. My telephone does not work at all. • Make sure the battery is installed and charged correctly (page 3). For optimum daily performance, return the handset to the telephone base or charger after use.
Appendix Troubleshooting My cordless handset isn’t performing normally. • Make sure you plug the power cord securely into the telephone base. Plug the power adapter into a different, working electrical outlet without a wall switch. • Move the cordless handset closer to the telephone base. You may have moved out of range. • Reset the telephone base. Unplug the electrical power. Wait for 15 seconds then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.
Appendix Troubleshooting • Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. • Test a working telephone at the telephone wall jack. If another telephone has the same problem, the problem is in the telephone wall jack. Contact your telephone service provider (charges may apply). • The telephone line cord may be defective.
Appendix Troubleshooting I get noise, static, or weak signals even when I’m near the telephone base. • If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Contact your DSL service provider for more information about DSL filters.
Appendix Troubleshooting The telephone does not receive caller ID while on a call. • Make sure you subscribe to caller ID with call waiting features provided by your telephone service provider. • The caller may not be calling from an area which supports caller ID. • Both your and the caller’s telephone service providers must use equipment compatible with caller ID service.
Appendix Troubleshooting I have accidentally set my LCD language to Spanish or French, and I don’t know how to change it back to English. • While the phone is not in use, press MENU once then enter 364#. • While on a call, press MENU once then enter 364#. Then the call ends automatically. Common cure for electronic equipment. • If the telephone is not responding normally, put the cordless handset in the telephone base. If it does not respond, try the following (in the order listed): 1.
Appendix Important safety instructions Appendix When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4.
Appendix Important safety instructions Battery • • • • • CAUTION: Use Only Supplied Battery. Do not dispose of the battery in a fire. Check with local waste management codes for special disposal instructions. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed. Exercise care in handling batteries in order not to create a short circuit with conductive materials.
Appendix Operating range This cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over only a certain distance - which can vary with the locations of the telephone base and handset, the weather, and the layout of your home or office. When the handset is out of range, the handset displays OUT OF RANGE OR NO PWR AT BASE.
Appendix The RBRC® seal The RBRC® seal on the nickel-metal hydride battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada. The RBRC® program provides a convenient alternative to placing used nickel-metal hydride batteries into the trash or municipal waste, which may be illegal in your area.
Appendix FCC, ACTA and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation.
Appendix FCC, ACTA and IC regulations If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited warranty. If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service.
Appendix California Energy Commission battery charging testing instructions This telephone is set up to comply with the energy-conserving standards right out of the box. These instructions are intended for California Energy Commission (CEC) compliance testing only. When the CEC battery charging testing mode is activated, all telephone functions, except battery charging, will be disabled. To activate the CEC battery charging testing mode: 1. Unplug the telephone base power adapter from the power outlet.
Appendix For C-UL compliance only Mesures de sécurité importantes Afin de réduire les risques d’incendie, de blessures corporelles ou d’électrocution, suivez toujours ces mesures préventives de base lorsque vous utilisez votre téléphone : 1. Lisez et comprenez bien toutes les instructions. 2. Observez toutes les instructions et mises en garde inscrites sur l’appareil. 3. Débranchez ce téléphone de la prise murale avant de le nettoyer. N’utilisez pas de nettoyeurs liquides ni en aérosol.
Appendix For C-UL compliance only 14. N’utilisez pas le téléphone pour rapporter une fuite de gaz à proximité de la fuite. En certaines circonstances, une flammèche pourrait être provoquée lorsque l’adaptateur est branché à une prise de courant, ou lorsque le combiné est déposé sur le socle. Ceci est un événement commun associé à la fermeture d’un circuit électrique.
Appendix For C-UL compliance only À propos des téléphones sans fil • Confidentialité : Les mêmes caractéristiques qui constituent des avantages pour les téléphones sans fil affichent également des restrictions. Les appels téléphoniques sont transmis entre le combiné sans fil et le socle par le biais d’ondes radio ; il y a donc la possibilité que vos conversations téléphoniques sans fil soient interceptées par des équipements de réception radio se trouvant dans la portée du combiné sans fil.
Appendix Limited warranty What does this limited warranty cover? The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the Product and all accessories provided in the sales package (“Product”) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions.
Appendix Limited warranty How do you get warranty service? To obtain warranty service, please visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. NOTE: Before calling for service, please review the user’s manual - a check of the Product’s controls and features may save you a service call.
Appendix Technical specifications Frequency control Crystal controlled PLL synthesizer Transmit frequency Handset: 1921.536-1928.448MHz Telephone base: 1921.536-1928.448MHz Channels 5 Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use. Power requirements Handset: 2.
Index A I About caller ID 34 About cordless telephones 54 Add a directory entry 28–29 Add a handset 40 Add a speed dial entry 32 Alphabetical search 30 Answer a call 18 Indicators 44 Installation 2–3, 5–6 Intercom 25–26 J Join a call 24 K B Key tone 16 Battery 52 Battery charging 4 Battery installation 3 L Language 13 Layout 7–9 Listening volume 18 C Caller ID 34–39 Call log display screen messages 39 Call transfer 22 Call waiting 19 Chain dialing 24 Charger installation 2 Charging 4 Check voicema
Index Speed dial 32–33 Store a directory entry 28–29 Store a speed dial entry 32 T Technical specifications 62 Telephone base indicators 44 Telephone base installation 2 Telephone base layout 7 Telephone base lights 44 Telephone base ringer 10 Temporary tone dialing 20 Time and date setting 17 Tone dialing 17 Troubleshooting 45–50 U Using the menu 10 V Voicemail 14, 15, 21 Volume 18 W Wall mount installation 5, 6 Warranty 60–61 Website 22 65
Designed to fit your home. And your life. VTech Communications, Inc. A member of THE VTECH GROUP OF COMPANIES. VTech is a registered trademark of VTech Holdings Limited. Specifications are subject to change without notice. © 2014 VTech Communications, Inc. All right reserved. 05/14. CS6519-X_WEBCIB_V2.