USER MANUAL TORNADO 963 LUMEN LAW ENFORCEMENT LED FLASHLIGHT FL-D45P
Thank you for choosing Vulta. The Vulta Tornado FL-D45P projects an ultrabright light with a wide, long-range beam. Perfect for law-enforcement and search and rescue operations, this high-output flashlight features a dualbutton system that’s easy to operate in emergency scenarios. The FL-D45P produces a maximum 963 lumens of light capable of temporarily blinding an attacker or locating tracks in a wooded area.
in a wide, smooth reflector that maximizes throw and flood capability. An ultraclear, tempered glass lens optimizes resistance to impacts and scratches. Crafted from MIL-SPEC Type III hard anodized aluminum alloy with a stainlesssteel bezel, and with a waterproof rating of IPX-8, the Tornado FL-D45P is a rugged tool that will withstand harsh environments. The deep-machined heat-sink fins provide enhanced handling when holding the flashlight with cold or wet hands or while wearing gloves.
PRECAUTIONS ⚠⚡ • Please read and follow these instructions and keep this manual in a safe place. • This flashlight is extremely bright and can cause temporary or even permanent blindness. Do not shine the flashlight in the eyes of any person or animal. When powering on the flashlight, make sure to point it down or away from you and anyone else. • The surface of this product can become hot after prolonged use. Be careful when touching it and make sure to keep it away from anything flammable or combustible.
• Install the batteries in the proper orientation as indicated by the instructions in this manual. • This product is waterproofed for freshwater only. If it comes into contact with salt water, immediately dry the flashlight and remove the batteries, reassemble, and rinse with freshwater. Dry thoroughly and install new batteries. • Do not attempt to disassemble or repair this product. It is dangerous and will also void the warranty. • Keep this product away from children.
PRODUCT DIAGRAM A LED B LAMP HEAD C SIDE BUTTON D HEAT SINK AREA E O-RING F TACTICAL RING G GRIP RINGS H LANYARD RING I O-RING J TAILCAP K TAILCAP BUTTON A B D C E Also Included: HOLSTER LANYARD SPARE O-RING F USER MANUAL G TWO-YEAR LIMITED WARRANTY 06 I H J K VULTA TORNADO
A Note about Maximum Output When the flashlight is in High mode, the battery discharge, drive circuit, and LED will all be producing heat, and the lamp head may become extremely hot. Please be cautious when touching it. To protect the battery, circuit, and LED, and to extend the lifetime of the flashlight, we do not recommend continuously running the flashlight on High mode for more than 10 minutes. INSTALLING BATTERIES The Tornado FL-D45P can be powered by two 18650 (3.
2. Unscrew and remove the tailcap from the flashlight. 3. Insert the batteries with the positive terminals facing the lamp head. 4. Screw the tailcap back onto the flashlight until secure. OPERATION The Tornado FL-D45P employs a dual-button system with unique circuitry to turn on the flashlight and engage the different modes. POWERING ON THE TORNADO FL-D45P Temporary On: To engage High mode, press and hold the tailcap button halfway. The flashlight will remain on until you release the tailcap button.
When you set the constant-on mode (high/ med/low, see Setting the Mode below) and then use the side button to enter standby mode, the next time you power on the flashlight via the side button, it will automatically enter the last-set constant-on mode. Note: Using the tailcap button to power off the flashlight will clear the constant-on setting, and the flashlight will automatically enter High mode the next time you power it on.
THE TACTICAL RING The tactical ring provides an enhanced grip over a smooth metal surface and also helps when holding the flashlight with cold or wet hands or while wearing gloves. The tactical ring can be used for specific law-enforcement applications, such as the syringe-style flashlight technique. The ring can be adjusted along the main body of the flashlight to fit your specific grip. O-RING MAINTENANCE The Tornado FL-D45P’s O-rings are installed on the threaded fittings to help seal out water.
SPECIFICATIONS OUTPUT High, Strobe, SOS: 963 lm Medium: 243 lm Low: 20 lm BEAM INTENSITY 71,556 cd LED TYPE CREE XM-L2 POWER SOURCE Two 18650 (3.7 V, 2600 mAh capacity with overcharge protection) or four CR123 or RCR123 (3 or 3.7 V) batteries RUNTIME High: 2 hr. Medium: 8 hr. Low: 60 hr. CONSTRUCTION Body: MIL-SPEC Type III hard anodized aerospace-grade aluminum alloy Bezel: Stainless steel Lens: Tempered glass IMPACT RESISTANCE Up to 6.5´ (2 m) WATERPROOFING IPX-8 standard, up to 6.
TWO-YEAR LIMITED WARRANTY This VULTA product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of two (2) years from the original purchase date or thirty (30) days after replacement, whichever occurs later.