User Manual

um
2 . 3 Key and User Interface
The gauge have a standard user interface, user can
Root
Caption
DIR AUTO
use it easily.
Left Key
a. To enter into menu mode from measure mode;
Delete Data
Recall
Browse Stat.
Options
Sub-menu
Active Item
16
102
N
101um
b. Left button operations in menu mode(Including
Limit
Menu Item
Mean
Min
99um
“Sure”, “Select”, “Delete”);
Right Key
a. Right button operations in menu mode(Including
Calibration
Enter Exit
Right Button
Left Button
Max 103um
“Cancel”, “Back”, “Exit”); b. Press and hold to rotate screen
c. Switch on/off the backlight in measure mode;
a. Menu Mode
b. Measure Mode
Up Key
a. Move up or roll up;
b. Increasing; c. Delete the last readings or whole group
Down Key
Muti-point Calibration
Up Key
Power on/off
ZE RO
Zero Calibraion
a. Move down or roll down; c. Zero calibration(For P3, P4)
b. Decreasing; d. Refresh LCD in measure mode(For P1, P2)
Zero Calibration Key(For P1, P2)
a. Press and hold to do zero calibration;
c. Press once to back measure mode in menu mode;
d. Press and hold when power on to make system reset.
Left Key
Right Key
Down Key
c. Key Define(For P1, P2)
Up Key
Power on/off
This will restore factory settings;
Calibration Key(For P1, P2)
a. Enter into calibration mode and back measure mode;
Left Key
Right Key
Down Key
d. Key Define(For P3, P4)
9