User Manual

b. Press “Up Key” or “Down Key” to activate “Delete Data” item, and press “Left Key” once to enter in;

c. Press “Up Key” or “Down Key” to activate ”Current Data” item, and press “Left Key” once. A dialog box will

be displayed.

d. Press “Left Key” once to confirm the selection and go back, or “Right Key” to cancel and back. Press “ZERO

Key” to back measure mode.

Delete whole group readings(Tips: If in measure mode, hold the “UP Key” by one beep)

a. Press “Left Key” once to enter into menu mode(”Root” directory);

b. Press “Up Key” or “Down Key” to activate “Delete Data” item, and press “Left Key” once to enter in;

c. Press “Up Key” or “Down Key” to activate ”Current Group” item, and press “Left Key” once. A dialog box

will be displayed.

d. Press “Left Key” once to confirm the selection and go back, or “Right Key” to cancel and back. Press “ZERO

Key” to back measure mode.

Recall and delete specified readings

a. Press “Left Key” once to enter into menu mode(”Root” directory);

b. Press “Up Key” or “Down Key” to activate “Recall” item, and press “Left Key” once to enter in;

c. Press “Up Key” or “Down Key” to recall the readings(n/Total number, “n” indicates the index of current

shown readings). User can press “Left Key” to delete current shown re adings.

d. Press “Right Key” to go back. Press “ZERO Key” to back measure mode.

Note

While readings

deleted

the statistics will be upgraded

automatically

2.10 High and Low Limit Alarm

Each group has individual high/low limit alarm settings. When switch the work group, the applied alarm

settings will also be switched automatically.

Set high/low limit for the current work group as below.

a. Press “Left Key” once to enter into menu mode(”Root” directory);