Datasheet
Product Information
Product Name PolyVent Hysi PolyVent XS PolyVent Standard PolyVent High Airflow
Product Number PMF100271 PMF200125 PMF200128 PMF200484 PMF200521
Product Performance Characteristics
Typical airflow 200 ml/min (dp = 70 mbar) 450 ml/min (dp = 70 mbar) 450 ml/min (dp = 70 mbar) 2500 ml/min (dp = 70 mbar) 2000 ml/min (dp = 70 mbar)
Laminate: membrane | backing material ePTFE | – ePTFE | Polyester (PET) ePTFE | Polyester (PET) ePTFE | Polyester (PET) ePTFE | Polyester (PET)
Membrane characteristic Oleophobic Oleophobic Oleophobic Hydrophobic Oleophobic
Vent body & cap: material Outer hull: Silicone | Carrier ring: TPE PBT-I-GF30 hydrostabilized PBT-I-GF30 hydrostabilized PBT-I-GF30 hydrostabilized PBT-I-GF30 hydrostabilized
Vent body & cap: color Outer hull: clear | Carrier ring: black Black (similar to RAL 9004) Black (similar to RAL 9004) Black (similar to RAL 9004) Black (similar to RAL 9004)
O-ring material – Shore A EPDM 50 Shore A EPDM 50 Shore A EPDM 50 Shore A
Installed height (to the inside) 1.4 mm 1.45 mm 2.9 mm 2.9 mm 2.9 mm
Installed height (to the outside) 0.0 mm (when inside-mounted) 3.75 mm 5.7 mm 5.7 mm 5.7 mm
Traceability No Yes: Individually laser-marked Yes: Individually laser-marked Yes: Individually laser-marked Yes: Individually laser-marked
Design and Dimensions
Units are in mm
Recommended Installation
Units are in mm
▪
Install on a flat, vertical housing surface where
water or other contaminants will not pool.
▪
PolyVent XS, Standard and High Airflow are
designed to be installed from outside the enclosure.
▪
PolyVent Hysi is designed to be mounted from
inside the enclosure (it can also be mounted from
outside, but inside-mounting is recommended).
GORE
Membrane
6.9
5.5
Ø 12.5
0.2
Ø 12.9
0.2
Housing wall
Ø 12
min: 5.8
0.1
Rz 8–12
min: 0.8
max: 4.0
min: 0.1
70°
1°
Ø
7.3
3.5 0.1
0.55 0.1
Housing wall
max. R0.15
0.1
0.05
GORE
Membrane
8.7
Ø 1 4.4
3.9
0.05
0.1 Ø 8.7
O-Ring 6.7x2.13
RoHS Information
Product Stewardship RoHS Status: W. L. Gore & Associates declares that we do not intentionally add substances listed
in RoHS Directive 2011/65/EU in its current valid version including all valid amendments to GORE
®
Protective
Vents.