Datasheet

Product Name PolyVent Hysi PolyVent XS PolyVent Standard PolyVent High Airflow
Product Number PMF100271 PMF200125 PMF200128 PMF200484 PMF200521
Product Performance Characteristics
Typical airflow 200 ml/min (dp = 70 mbar) 450 ml/min (dp = 70 mbar) 450 ml/min (dp = 70 mbar) 2500 ml/min (dp = 70 mbar) 2000 ml/min (dp = 70 mbar)
Laminate: membrane | backing material ePTFE | – ePTFE | Polyester (PET) ePTFE | Polyester (PET) ePTFE | Polyester (PET) ePTFE | Polyester (PET)
Membrane characteristic Oleophobic Oleophobic Oleophobic Hydrophobic Oleophobic
Vent body & cap: material Outer hull: Silicone | Carrier ring: TPE PBT-I-GF30 hydrostabilized PBT-I-GF30 hydrostabilized PBT-I-GF30 hydrostabilized PBT-I-GF30 hydrostabilized
Vent body & cap: color Outer hull: clear | Carrier ring: black Black (similar to RAL 9004) Black (similar to RAL 9004) Black (similar to RAL 9004) Black (similar to RAL 9004)
O-ring material – Shore A EPDM 50 Shore A EPDM 50 Shore A EPDM 50 Shore A
Installed height (to the inside) 1.4 mm 1.45 mm 2.9 mm 2.9 mm 2.9 mm
Installed height (to the outside) 0.0 mm (when inside-mounted) 3.75 mm 5.7 mm 5.7 mm 5.7 mm
Traceability No Yes: Individually laser-marked Yes: Individually laser-marked Yes: Individually laser-marked Yes: Individually laser-marked
Design and Dimensions
Units are in mm
Recommended Installation
Units are in mm
▪
Install on a flat, vertical housing surface where
water or other contaminants will not pool.
▪
PolyVent XS, Standard and High Airflow are
designed to be installed from outside the enclosure.
▪
PolyVent Hysi is designed to be mounted from
inside the enclosure (it can also be mounted from
outside, but inside-mounting is recommended).
GORE
Membrane O-Ring 5.2x2.6
12.9
Ø 17
Ø 7.8
4.5 0.05
0.1
Ø 6.4
0.1
4
0.15
0.5 0.1
Housing wall
70°
2°
Recommendation for storage
Gore recommend to store products in cool dry conditions (20–25 °C / 30–50% RH) and out of direct sun light,
preferably in the original packaging.