Datasheet

Bezeichnung :
description :
Größe / size 0805C
A 2,28±0,2 mm
B 1,70±0,2 mm
C 1,28±0,2 mm
D 0,50 ref mm
F 0,51 ref mm
H 1,78 ref mm
I 1,02 ref mm
J 0,76 ref mm
B Elektrische Eigenschaften / electrical properties:
Eigenschaften /
properties
Wert / value Einheit / unit tol.
Induktivität /
inductance
Güte Q /
Q factor
DC-Widerstand /
DC-resistance
Nennstrom /
rated current
Eigenres.-Frequenz /
self-res.-frequency
E Testbedingungen / test conditions:
Luftfeuchtigkeit / humidity: 33%
Umgebungstemperatur / temperature: +20°C
G Eigenschaften / general specifications:
Keramik/ ceramic Lagerbedingungen / Storage conditions: -10°C ~ +40 °C
30 ~70 % RH
Betriebstemperatur / operating temperature: -40°C - +125°C
HBH Version 4 11-07-07
ES Version 3 10-08-27
Skle Version 2 07-01-17
Skle Version 1 08-03-06
Name Änderung / modification Datum / date
Würth Elektronik eiSos GmbH & Co. KG
D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400
http://www.we-online.com
min.
R
DC
min.
L
max.
500 MHz
∆T = 15 K
250 MHz
MHz
..............................................................
........................................................................
..................................................................................
Würth Elektronik
Ceramic-SMD-Inductor WE-KI
Kontaktmaterial/ contact plating
Freigabe erteilt / general release:
A Mechanische Abmessungen / dimensions:
±5%
22
nH
Q
55
Keramik-SMD-Induktivität WE-KI
Artikelnummer / part number :
Geprüft / checked
2600
SRF
Datum / date
..................................................................................
Unterschrift / signature
Kontrolliert / approved
Spezifikation für Freigabe / specification for release
DATUM / DATE : 2011-07-07
max.
mA
Testbedingungen /
test conditions
Kunde / customer :
74476012C
Basismaterial / base material:
F Werkstoffe & Zulassungen / material & approvals
ENA 5071B für/for SRF
D Prüfgeräte / test equipment:
Agilent 4287A +HP 16193A für/for L und/and Q
HP 4338B für/for R
DC
C Lötpad / soldering spec.:
Ag + Ni + Au
Kunde / customer
0,22
I
DC
HP 4285A + 42841A + 42842C + 42851 - 6110 für/for I
DC
500
I
J
I
H
This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and
reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation,
(automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the
design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and
reliability functions or performance.
LF
A
F
B
D
C
SEITE 1 VON 1