Datasheet

Bezeichnung :
description :
Größe / size 1008
A 2,5 ± 0,2 mm
B 2,0 ± 0,2 mm
C 1,6 ± 0,2 mm
D 0,5 ref. mm
F 0,5 ± 0,1 mm
H 2,2 mm
I 0,9 mm
J 1,2 mm
Eigenschaften /
p
ro
p
ertie
s
Wert / value Einheit / unit tol.
Induktivität
/
inductanc
e
Güte Q /
Q facto
r
DC-Widerstand
/
DC-resistanc
e
Nennstrom
/
rated curren
t
Eigenres.-Frequenz /
self-res.-frequency
60 … 70%
25°C
Keramik/ ceramic
SKLE Version 1 07-12-28
Name Änderung / modification Datum / date
Umgebungstemperatur / ambient temperature: -40°C ~ + 110°C
Luftfeuchtigkeit / humidity:
Umgebungstemperatur / temperature:
G Eigenschaften / general specifications:
Basismaterial / base material:
C Lötpad / soldering spec.:B Elektrische Eigenschaften / electrical properties:
E Testbedingungen / test conditions:
Testbedingungen /
test condition
s
±5%
8.2
Ω
nH
Kontaktmaterial / contact plating: Mo/Mn + Ni + Au
http://www.we-online.com
Spezifikation für Freigabe / specification for release
DATUM / DATE : 2004-10-11
max.
mA
Datum / date
.............................................................................
Unterschrift / signature
Kontrolliert / approved
W
ürth Elektronik eiSos GmbH & Co. KG
D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400
Geprüft / checked
Betriebstemperatur / operating temperature: -40°C ~ +125°C
Kunde / customer
Freigabe erteilt / general release:
.....................................................
.
..........................................................
.
..................................................................................
Kunde / customer :
744762082A
Keramik-SMD-Induktivität WE-KI
Ceramic-SMD-Inductor WE-KI
Artikelnummer / part number :
A Mechanische Abmessungen / dimensions:
0.06
1000 MHz
∆T = 15 K
100 MHz
min.
R
DC
min.
L
I
DC
5500 MHzSRF
1000
Würth Elektronik
ENA 5071B für/for SRF
D Prüfgeräte / test equipment:
Agilent 4287A + HP 16193A für/for L und/and Q
HP 4338B für/for R
DC
HP 4285A + 42841A + 42842C + 42851-6110 für/for I
DC
Lagerbedingungen / storage conditions: -10°C ~ + 40°C
30 ~ 70% RH
F Werkstoffe & Zulassungen / material & approvals:
50
Q
max.
I
J
I
H
A
F
B
D
C
This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is
especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control,
train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition,
sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
SEITE 1 VON 1