Specification Sheet

ManualsBrandsWAC Lighting ManualsTransformersWAC Lighting 12 Volt Class 2 Enclosed Electronic Transformer - 300 Watt Maximum Load

LOW VOLTAGE ELECTRONIC TRANSFORMER MODEL EN

1260

RB2

Ordering Matrix

Model Finish Accessories

EN-1260-RB2 BK

See table below

Ordering Example (model-finish) : EN-1260-RB2-BK

Product Details Specification Features

Description:

Low Voltage Class II electronic transformer designed to be used

as an enclosed remote transformer. Enclosure has separate

compartments for transformer, line and low voltage wiring.

Catalog Number:

EN = Advanced electronic circuitry

1260 = 12 volt , 60 watt

RB = Remote Boxed, Class II

AR = Auto-Reset

Input:

Output:

120V (50/60Hz)

12V

Min Load:

Max Load:

20W

60W

Max Input Amp: 0.53A (@ 120V)

Transformer

Frequency:

20khz.

True RMS meter is required to read the high frequency output.

Dimming:

Dimmable with electronic low voltage dimmers.

Dimmers should always be installed on the primary side of the

transformer.

Listing: U.L. listed, File Number E204239.

Accessories: MTB-01 – Multiple Terminal Block

• U.L. 2108 listed Class II

electronic low voltage

transformer.

• Built-in auto reset, soft start,

short and overload circuit

protection features. The soft

start delayed start feature

extends lamp life by delaying the

abrupt inrush current to the lamp.

• Class II transformers are

inherently protected and power

limited, protecting the lighting

system from both normal and

abnormal short circuits

• Enclosure has knockouts on

three sides. Screw holes are

located on one long side for

securing enclosure in place.

• 5 year W.A.C. Lighting product

warranty.

W.A.C. Lighting reserves the right to modify the design of our products as part of the company’s continuous improvement program.

CATALOG NUMBER

PROJECT

TYPE

1 5/8"

6 5/8"

1 1/8"

Sep 2008

Summary of content (4 pages)

PAGE 1
TYPE CATALOG NUMBER PROJECT LOW VOLTAGE ELECTRONIC TRANSFORMER MODEL EN-1260-RB2 6 5/8" 1 5/8" 1 1/8" Ordering Matrix Model Finish Accessories EN-1260-RB2 BK See table below Ordering Example (model-finish) : EN-1260-RB2-BK Product Details Specification Features Description: Low Voltage Class II electronic transformer designed to be used as an enclosed remote transformer. Enclosure has separate compartments for transformer, line and low voltage wiring.
PAGE 2
TYPE CATALOG NUMBER PROJECT LOW VOLTAGE ELECTRONIC TRANSFORMER MODEL EN-12120-RB2 Ordering Matrix Model Finish Accessories EN-12120-RB2 BK See table below Ordering Example (model-finish) : EN-12120-RB2 Product Details Description: Specification Features Low Voltage Class II electronic transformer designed to be used as an enclosed remote transformer. Enclosure has separate compartments for transformer, line and low voltage wiring. W.A.
PAGE 3
TYPE CATALOG NUMBER PROJECT LOW VOLTAGE ELECTRONIC TRANSFORMER MODEL EN-12180-RB2 Ordering Matrix Model Finish Accessories EN-12180-RB2 BK See table below Ordering Example (model-finish) : EN-12180-RB2 Product Details Description: Specification Features Low Voltage Class II electronic transformer designed to be used as an enclosed remote transformer. Enclosure has separate compartments for transformer, line and low voltage wiring. W.A.
PAGE 4
TYPE CATALOG NUMBER PROJECT LOW VOLTAGE ELECTRONIC TRANSFORMER MODEL EN-12300-RB2 Ordering Matrix Model Finish Accessories EN-12300-RB2 BK See table below Ordering Example (model-finish) : EN-12300-RB2 Product Details Description: Specification Features Low Voltage Class II electronic transformer designed to be used as an enclosed remote transformer. Enclosure has separate compartments for transformer, line and low voltage wiring. W.A.