Specification Sheet

LOW VOLTAGE ELECTRONIC TRANSFORMER MODEL EN-12180-RB2
Ordering Matrix
Model Finish Accessories
EN-12180-RB2 BK See table below
Ordering Example (model-finish) : EN-12180-RB2
Product Details Specification Features
Description:
Low Voltage Class II electronic transformer designed to be used
as an enclosed remote transformer. Enclosure has separate
compartments for transformer, line and low voltage wiring.
W.A.C Lighting Enclosed Class II transformers are equipped with
on/off toggle switches and LED status indicators. Class II
transformers are designed to be intrinsically safe. Secondary
wiring for Class II transformers does not require conduit or clamp
wiring techniques which are suitable for most cabinet listed
fixtures.
Catalog Number:
EN = Advanced electronic circuitry
12180 = 12 volt , 180 watt
RB2 = Remote Boxed, Class II
Input Voltage:
Output Voltage:
120V (50/60Hz)
12V
Min Load:
Max Load:
20W Per Circuit
60W Per Circuit; 3×60W=180W
Max Input Amp:
1.5A (@ 120V)
Transformer
Frequency:
20khz.
True RMS meter is required to read the high frequency output.
Dimming:
Dimmable with electronic low voltage dimmers.
Dimmers should always be installed on the primary side of the
transformer.
Listing:
U.L. listed, File Number E310393.
Accessories:
• Meets UL1012 and UL1310
standard .listed Class II
electronic low voltage
transformer.
• Built-in auto reset, soft start,
short and overload circuit
protection features. The soft
start delayed start feature
extends lamp life by delaying the
abrupt inrush current to the lamp.
• Class II transformers are
inherently protected and power
limited, protecting the lighting
system from both normal and
abnormal short circuits
• Enclosure has knockouts on
three sides. Screw holes are
located on one long side for
securing enclosure in place.
• 5 year W.A.C. Lighting product
warranty.
W.A.C. Lighting reserves the right to modify the design of our products as part of the company’s continuous improvement program.
CATALOG NUMBER
PROJECT
TYPE
Sep 2008