Installation & Assembly

WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JULY, 2016 3
DOWNLIGHT TRIM INSTALLATION
1. When installing in drywall, cut a hole 4 5/8” in the drywall.
Note: 1 1/2” inch maximum ceiling thickness.
2. Install light engine into the housing by rotating it clockwise
onto stud (Fig.5)
Connect light engine and housing power connectors (Fig.6).
3. Raise the trim to housing, depress trim spring clips and push
the trim assembly up until the trim ring is ush to the ceiling
(See FIG.7 and FIG.8).
INSTALLATION INSTRUCTION
Aether 3.5” Shallow Recessed Housing and Trims
HR-3LED-H17A
FIG.5
FIG.6
FIG.7
FIG.8