Installation & Assembly

WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JULY, 2016 5
INSTALLATION INSTRUCTION
Aether 3.5” Shallow Recessed Housing and Trims
HR-3LED-H17A
WALL WASH TRIM INSTALLATION
1. When installing in drywall, cut a hole 4 5/8” in the drywall.
Note: 1 1/2” inch maximum ceiling thickness.
2. Raise trim to ceiling, connect the power quick connector
secure safety cable to top of trim using screw provided
(as Fig.16).
3. Push the trim assembly up inside the housing until the trim
ring is ush to the ceiling (as Fig.17 and Fig.18).
FIG.16
FIG.17
FIG.18
Safety cable
Power
Quick
Connector