Assembly Instructions
Table Of Contents
PARTS # PARTS NAME QTY
P1
BACK LEGS
2
P2
PLASTIC
WASHER
2
P3
BACKREST
1
P4
SEAT
1
1. Take out two legs and washers from the small box and backrest from the big box which is
in the seat.
3.Smooth down the fabric flap on the Chair Backrest.Run your hands down both sides of the
flap,from top to bottom,allowing the velcro tape to adhere to the flap under the seat of the
chair.
2. Turn the chair upside down and lay on protective carpet. Screw in the back legs (P1) using
Plastic Washer (P2) for each. Screw tight to the right angle. Insert the small metal arms on
the sides of the Chair Backrest(P3) into the prefabricated slide lock gadget onthe Chair
Seat(P4) as shown above.
Assembly Instruction---Recliner Chair
DRAWING
P3
P1
P1
P4
P2
P1