Operation Manual

EN
CFX35 – CFX65DZ Operation
33
Emergency switch (when fitted) and USB port (fig. 5, page 4)
6 Operation
6.1 Before initial use
I
Reversing the lid opening direction
CFX50, CFX65, CFX65DZ
The lid hinges can be moved to the opposite side if you want to
open the lid from the opposite direction. To do this, proceed as
follows:
➤ Open the lid and remove it (fig. 6 A).
➤ Remove 3 screws per hinge (fig. 6 B) and take off hinges.
➤ Remove plastic covers from new hinge positions with a small
screwdriver and re-fit to old hinge positions.
➤ Re-fit hinges in new positions.
➤ Insert the lid in the hinges on the opposite side (fig. 6 C).
Selecting the temperature units
Temperature display units can be switched between Celsius and
Fahrenheit as follows:
➤ Switch on the cooler.
➤ Press the “SET” button (fig. 3 4, page 3) twice.
➤ Use the “UP +” (fig. 3 7, page 3) or “DOWN
–” (fig. 3 6,
page 3) buttons to select Celsius or Fahrenheit.
Item Description
1 Emergency switch
2 USB port for power supply
NOTE
Before starting your new cooler for the first time, you should clean
it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter “Cleaning and maintenance” on
page 41).