Operation Manual

EN
Operation CFX35 – CFX65DZ
34
✓ The selected temperature units then appear in the display for a
few seconds. The display flashes several times before it returns
to the current temperature.
6.2 Energy saving tips
 Choose a well ventilated installation location which is protected
against direct sunlight.
 Allow warm food to cool down first before placing it in the device
to keep cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooler unit open for longer than necessary.
 Defrost the cooler once a layer of ice forms.
 Avoid unnecessary low temperatures.
6.3 Connecting the cooler
Connecting to a battery (Vehicle or boat)
The cooler can be operated with 12 V or 24 V
g.
A
For safety reasons the cooler is equipped with an electronic system
to prevent the polarity reversal. This protects the cooler against
short-circuiting when connecting to a battery.
➤ Plug the 12/24 V connection cable (fig. 1 2, page 3) into the
device DC voltage socket and also into a 12 V or 24 V cigarette
lighter socket.
NOTICE! Danger of damage!
Disconnect the cooler and other consumer units from the battery
before you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.