Operation Manual

EN
CFX35 – CFX65DZ Operation
37
6.5 Using the cooler
A
➤ Place the cooler on a firm foundation.
Make sure that the ventilation slots are not covered and that the
heated air can dissipate.
I
➤ Connect the cooler, see chapter “Connecting the cooler” on
page 34.
A
➤ Press the “ON/OFF” button (fig. 3 1, page 3) for between one
and two seconds.
✓ The LED “P” lights up (fig. 3 2, page 3).
✓ The display (fig. 3 5, page 3) switches on and shows the
current cooling temperature.
!
NOTICE! Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the
heat that generated during operation can dissipate. Ensure that
the ventilation slots are not covered. Make sure that the device
is sufficiently far away from walls and other objects so that the
air can circulate.
NOTE
Place the cooler as shown (fig. 1, page 3). If you operate the box
in a different position it can be damaged.
NOTICE! Danger from excessively low temperature!
Ensure that the only those objects are placed in the cooler that are
intended to be cooled at the selected temperature.
CAUTION! Health hazard!
CFX 65DZ:
If the temperature in the freezer compartment (fig. 8 1, page 5)
is very low (–22°C) , the temperature range in the cooling depart-
ment (fig. 8 2, page 5) can be below freezing as well.