Instruction manual

Using the stationary air conditioner

6.3 Selecting the temperature

You can select temperatures between 17 °C and 30 °C.

➤ Press + or – (fig. 2 6/7, page 3) on the control panel or + or –

(fig. 3 2/3, page 4) on the remote control to set the temperature in 1 °C

increments.

✓ The digital display (fig. 2 5, page 3) shows the operating mode and the

selected temperature in °C.

Note

If mode I or II fails to achieve the selected temperature, switch to

the next mode up or to automatic mode.

6.4 Selecting the operating mode

You can choose between four operating modes and the timer function:

➤ Press the mode button on the control panel (fig. 2 4, page 3) or the

mode + or – (fig. 3 4/5, page 4) on the remote control to select the

mode.

✓ The first position of the digital display (fig. 2 5, page 3) shows the

selected mode.

Operating

mode

Display

message

Explanation

1Lowest output level – the fans run at the lowest level.

2 Medium output level – the fan runs at the medium level.

3Highest output level – the fan runs at the highest level.

Automatic

The system automatically selects the optimum fan

speed to reach the set temperature most efficiently.

Timer

function

000

Pre-selection of running time from 10 to 120 minutes.

Alternating display for operating mode and remaining

running time.

BA_CA850S_SP950.book Seite 31 Mittwoch, 2. Mai 2012 5:05 17