Instruction manual
EN
CR50, CR 65, CR80, CR110, CR140 Installing and connecting the refrigerator
39
6.2 Control elements
7 Installing and connecting the
refrigerator
a
Safety instructions for installation on boats
Please note the following instructions for installation on boats:
– The device can be tilted sideways up to 30°. When setting up
the refrigerator, note that it must be fastened to take account of
this. If you have any questions regarding installation, consult
your specialist dealer.
– Install the refrigerator so that the warm air produced can easily
flow away (either upwards or to the sides, fig. 8, page 6).
– The appliance is designed for ambient temperatures between
+18°C and +43°C.
– If the appliance is powered by the mains, ensure that the power
supply has a residual current circuit breaker.
– Observe all the other installation instructions in this section.
No. in illustration Explanation
1 Freezer compartment
2 Wire shelf (folding, so that bottles can be put in the fridge)
3 Fruit compartment
4 Shelf
5 Bottle restraint (to hold bottles in the door)
6 Compartment with lid (hinged)
No. in
fig. 6, page 5
Explanation
1 Temperature controller
2 Green LED: operation
3 Red LED: fault
4 Interior lighting
_cr-kuehlschraenke.book Seite 39 Montag, 27. Februar 2012 12:46 12