User`s manual

www.wagan.com

Elite 180W Pure Sine Inverter by Wagan Tech

Wagan and wagan.com are trademarks used by Wagan Corporation

Troubleshooting

PROBLEM: Low or No Output Voltage – Fault LED Lit

Reason Solution

Poor contact with battery, inverter

terminals or DC socket.

Clean terminals thoroughly. Reinstall

and tighten. Clean DC socket with non-

metallic abrasive emery stick.

PROBLEM: No Output Voltage – No LEDs Lit

Reason Solution

Fuse blown Check vehicle’s Accessory Socket Fuse

and if blown, replace with the same

type and rating fuse.

PROBLEM: Inverter is Shut Down – Fault LED Lit

Reason Solution

Battery voltage below 10 Volts Charge or replace battery.

Inverter is too hot (thermal shut down

mode).

• Allow inverter to cool.

• Check for adequate ventilation.

• Reduce the load on the inverter to

rated continuous power output.