User`s manual

www.wagan.com

Elite 180W Pure Sine Inverter by Wagan Tech

Wagan and wagan.com are trademarks used by Wagan Corporation

• Do not continuously operate any equipment over 180 watts.

• This inverter is designed to operate from a 12 volt DC power source only.

• Do not attempt to connect the inverter to any other power source, including

any AC power source.

• Incorrect battery polarity will damage the inverter and void the warranty.

• Keep this inverter in a dry environment.

• Do not open the inverter; there are no user serviceable parts inside.

WARNING

INVERTER OUTPUT CAN BE LETHAL. IMPROPER USE OF THIS INVERTER

MAY RESULT IN PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF

LIFE.

Front

The Front Panel view shows the inverter’s ON/OFF Switch, Indicators, AC Outlet

and USB Power Port.

• ON/OFF Switch — This switch controls AC output of the inverter.

• Operating LED (Green) — When this green LED is lit, the inverter is operating

normally.

• FAULT LED (Red) — This indicator turns RED as the inverter shuts down

because of: Excessive Temperature, Overload, Under Voltage or Over

voltage.

Immediately turn off all AC appliances if the FAULT LED is lit. Allow the

inverter to cool before continuing. Make sure that the ventilation vents are not

blocked.