User Manual
English
6 © Wagner Spray Tech. - All Rights Reserved
Spraying
h Spray Controls
There are two main controls that determine the width,
orientation or thickness of the spray pattern.
• Material ow control
• Air cap / pattern adjustment
Note: For a video showing Home Décor Sprayer
spraying tips and best practices, visit
www.homedecorsprayer.com.
1. Adjust the material ow by turning the knob on the
rear of the spray gun.
Tip: With practice, the material ow can also be
controlled by the trigger. The further the trigger pull,
the more material is sprayed and vice versa.
2. Adjust the spray pattern by turning the air cap ears.
=
=
=
=
=
=
C
D
=
=
=
=
=
=
AB
=
=
=
=
=
=
C
AB
D
Up / down motion Side / side motion Up/down or side/side
4-6” wide pattern 4-6” tall pattern 1-2” pattern diameter
For spraying large surfaces
(dressers or desktops)
For spraying narrow
surfaces (chair legs or
spindles)
3. Practice your technique (use provided poster).
h Get closer. The spray gun should be 3-6 inches
away from the spray object.
h Full passes. Spray the material in full passes, not
short waves.
h Light coats. For a ner nish, coat lightly during
rst pass, then cover completely on second pass.
I II III IIII
Less paint More paint
Air cap ears
3 - 6 “
(7-15 cm)
1
2
3
Air cap ears
Uncontrolled Copy