Product Manual

English
2 © Wagner Spray Tech - All Rights Reserved
Important Safety Information
Read all safety information before
operating the equipment. Save these
instructions.
Indicates a hazardous situation which,
if not avoided, could result in death or
serious injury.
To reduce the risks of re or explosion,
electrical shock and the injury to
persons, read and understand all
instructions included in this manual. Be
familiar with the controls and proper
usage of the equipment.
Grounding Instructions
This product must be grounded. In the event of an
electrical short circuit, grounding reduces the risk
of electric shock by providing an escape wire for
the electric current. This product is equipped with a
cord having a grounding wire with an appropriate
grounding plug. The plug must be plugged into an
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
WARNING - Improper installation of
the grounding plug can result in a risk
of electric shock.
If repair or replacement of the cord or plug is
necessary, do not connect the green grounding wire
to either at blade terminal. The wire with insulation
having a green outer surface with or without yellow
stripes is the grounding wire and must be connected
to the grounding pin.
Check with a qualied electrician or serviceman
if the grounding instructions are not completely
understood, or if you are in doubt as to whether the
product is properly grounded. Do not modify the
plug provided. If the plug will not t the outlet, have
the proper outlet installed by a qualied electrician.
This product is for use on a nominal 120 volt
circuit and has a grounding plug that looks like
the plug illustrated below. Make sure that the
product is connected to an outlet having the same
conguration as the plug. No adapter should be
used with this product.
Grounded Outlet
Grounding Pin
Cover for grounded outlet box
WARNING - To reduce the risk
of re or explosion:
1. When spraying inside, the turbine must be
placed outside of the room in which spraying
is being performed, at a minimum of 16.5 feet
(5 m) from the nearest doorway that is closest
to the spray object. Do not place the turbine in
the spray area.
16.5’ (5 m)
2. When spraying outside, the turbine must be
placed a minimum of 16.5 feet (5 m) away from
the spray area.
16.5’ (5 m)
3.3’ (1 m)
3. Use only a spray gun that is equipped with a
plastic container. This system is not compatible
with metal containers. The sprayer must not
be altered or combined with parts that are not
approved by the manufacturer.
4. No electrostatic equipment is to be used in
conjunction with this sprayer.
5. Do not spray ammable or combustible materials
near an open ame, pilot lights or sources of
ignition such as hot objects, cigarettes, motors,
electrical equipment and electrical appliances.
Avoid creating sparks from connecting and
disconnecting power cords.
6. Make sure the vehicle that is being sprayed is
turned o and has been allowed to cool prior to
using the sprayer.
7. Verify that all containers and collection systems
are grounded to prevent static discharge.
8. Connect to a grounded outlet and use
grounded extension cords (electric models
only). Do not use a 3 to 2 adapter.