Instructions/Assembly Guide

ManualsBrandsWalker Edison ManualsDining Tables & Sets72" Modern Farmhouse Solid Wood Dining Table - Rustic Oak

Table Of Contents

P.1

Assembly Instructions

2020

Please visit our website for the most current instructions, assembly tips, report damage,

or request parts. www.walkeredison.com

Revised 12/08/2020 (L)

Walker Edison

Item # : TW72AMX

Summary of content (9 pages)

PAGE 1
Item # : TW72AMX Assembly Instructions TM Walker Edison ® Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Revised 12/08/2020 (L) Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 2
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The main type of hardware used to assemble this product are: bolts and screws. V. Power tools should not be used to assemble this product. VI. Drill may be needed for securing product to wall.
PAGE 4
Hardware List A M 8x40mm Bolt 8 pcs B M 6x20mm Bolt 6 pcs C 1/4" Lock washer 6 pcs D 5/16" Flat washer 14 pcs E M 12mm Wrench 1 pc F M 4mm Hex key 1 pc The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 5
Step 1 A 2 D E D A 3 Insert part (2) to part (3) ,then using bolt (A) attach flat washer (D) into part (3) to part (2) with wrench (E) as per diagram. Note:Please do not fully tighten all bolts. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 6
Step 2 3 A D 2 D E A Place part (3) to part (2) ,then using bolt (A) attach flat washer (D) into part (3) to part (2) with wrench (E) as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 7
Step 3 3 F 3 B C D 1 Using bolt (B) attach Lock washer (C) and Flat washer (D) into part (3) to part (1) with Hex key (F) as per diagram. Note: Please fully tighten all bolts. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 8
Step 4 Position the assembled unit at the desired location ,if necessary adjust the floor leveler at the bottom of the leg to level the unit . Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.