Instruction Manual
Page 9
Bluetooth Settings (Left Earbud Only)
Use the LEFT earbud to control device Bluetooth Settings.
Pairing the device
To enter pairing mode, from the powered down state, press and hold the touch
zone for 5 seconds. An audible notication will play (“Pairing”) when the device
enters pairing mode.
Pairing Mode
• In this mode, the unit will advertise itself and allow itself to be paired to a new
device.
• The device will enter this mode automatically when no previous paired device
prole is present.
• The LED will alternately ash red and blue
• Pairing mode will timeout after 60 seconds and enter Reconnectable Mode.
• The system will play the “Pairing” audio clip on mode activation
• The advertising name will be: “Silencer BT 2.0”
Paired Mode
• While paired to a device, the LED will remain o.
• The system will play the “Connected” audio clip when entering this mode.
• If the device disconnects, it will enter Reconnectable Mode.
Phone Call
• To answer a call, tap the touch zone
• To reject a call, press and hold the touch zone for 1sec
• To end a call, tap the touch zone
Audio/Music
• To Play music, tap the touch zone
• To Pause music, tap the touch zone during playback
• To skip to next track, short press the BT button twice
• To skip to previous track, short press the BT button three times