Item #: W44COS Assembly Instructions For our most current instructions, to request missing, lost or broken parts, or for any other Customer Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The main types of hardware used to assemble this product are: wood dowels, cam bolts and locks, bolts and screws. V. The provided glue is to secure wood dowels in place.
Parts List
Hardware List Long bolt Fixed door hinge Spring door hinge Short bolt U
Screw cam bolts (B) into panel (2). Insert dowels (C) into slat (14). Attach slat (14) to panel (2) using cam bolts and dowels as guides. Insert cam locks (A) into slat (14) and tighten with a screwdriver.
Insert dowels (C) into panels (2,3,10). Screw cam bolts (B) into stand top (1). Attach door stopper (G) to stand top (1) using screws (H).
Screw cam bolts (B) into legs (5,6,7,8). Insert dowels (C) into legs (5,6,7,8). Attach legs (5,6) to panel (3) using cam bolts and dowels as guides. Insert cam locks (A) into panel (3) and tighten with a screwdriver.
Attach legs (7,8) to second panel (3) using cam bolts and dowels as guides. Insert cam locks (A) into panel (3) and tighten with a screwdriver. Attach support leg (11) to panel (2) using long bolts (E). Tighten long bolts (E) with wrench (F). Attach panel (10) to opposite side of panel (2) using long bolts (E). Tighten long bolts (E) with wrench (F).
Attach the assembly from the previous step to the leg assembly from Step 6 using cam bolts and dowels as guides. Insert cam locks (A) into panel (2) and tighten with a screwdriver. Attach the leg assembly from Step 7 to panel (2) using cam bolts and dowels as guides. Insert cam locks (A) into panel (2) and tighten with a screwdriver.
Insert cam locks (A) into the stand assembly. Attach stand top (1) to the stand assembly using cam bolts and dowels as guides. Tighten cam locks (A) with a screwdriver.
Attach handles (N) to doors (12,13) using screws (P). Screw short bolts (K) into doors (12,13).
Insert plastic pivots (Q) into stand top (1) and panel (2).
4 4 Secure back panels (4) using plastic wedges (R) and screws (S). The thin lip of each plastic wedge (R) will fit between back panel (4) and the solid wood of the stand assembly.