Instructions

the individual programs.
Press1. MENU.
Select program type using keys .2.
Press to confirm selection.OK3.
The number of free programs appears for 3 secs.»
The first program in the memory appears.»
Press for 2 secs.4.
The display shows the first empty program.»
Press to confirm.OK5.
The program number is selected.»
Followed by channel setting.»
c1 c2
P02
Set channel (twin channel) using keys .1.
C1/C2 or both flash.»
Press to confirm.OK2.
The program number is selected.»
Followed by channel setting.»
i
Procedure valid for all types of programs Further settings are described in
Set program start time using keys in the format1.
hh/mm.
Single pressure of keys moves field by minutes.
Prolonged pressure of keys moves field by hours.
Press to confirm.OK2.
The seconds field appears.»
Set the seconds using keys .3.
Press to confirm.OK4.
The program start time has been set.»
Followed by TIME/OFF setting.»
P02
Set program end time using keys . 1.
Repeat operations as per TIME/ON.
Press to confirm.OK2.
The program end time has been set»
Press to confirm program end time.OK3.
i
i
Set day (only for weekly models)
Select the day or group of days in which the program must be executed.
P02
Set the day or group of days using keys .1.
The flashing arrow indicates the day or group of»
days selected.
Press to confirm.OK2.
Followed by TIME/ON setting.»
1 2 3 4 5 6 7
(only for weekly models)
only for weekly models: if a group of days is selected (eg Saturday and Sunday) and
a timeframe thatextends past midnight (eg ON = 23:30 hours, time OFF = 2:00), the
program runs two times, but the second run ends on Monday. In this case, the
Monday icon flashes as a warning. This same principle applies to programs lasting
longer than aday.
4. Enter a new program or exit
press the button several timesMENU
Onlyforweeklymodels: set the OFF hour scrolling the time forwardwithrespectto
the ON hour. Scroll back to select the whole week
Note: if you enter zero in the seconds fields for ON and OFF, the seconds field is not
shown in the data summary.
Programs must also have a minimum duration of one second, so the OFF time cannot be
the same asthe ON time.(Programs like this arenot accepted.)
P05
12
14
1 2 3 4 5 6 7
Creating a program with a duration of several days
(Only weekly mod.)
The duration of a program can be extended to several days
(eg, begins Mondayat12:00andendsWednesdayat
14:00). Just scroll past 24 hours when setting "TIME OFF".
Scrolling past 24hoursisconfirmed
when the day after the start of the program blinks. At every
passage from 24 hours, the program will be further
extended to thenextday.
2-3 Create a new program
Selection of program type (e.g. with P Standard):
Select channel (only 2 channels models)
Set TIME/ON
Set TIME/OFF
(only for dual channel models)
22
R a n d o m p
S t a n d a r p
S t a n d a r p
F r e e
E m p t y
S t a n d a r p
C h a n n e l
S t a n d a r p
Day
E n d
A n n u a l p
EN
P02
P02
P02
P02