Instructions

Select the program type from the menu (e.g. RAN1.
DOM P) using keys .
Press to confirm.OK2.
The programs of the same type in the memory»
are displayed.
Select the program to be checked using keys . 3.
The display shows the settings cyclically.»
2-6 Delete a program (fast method)
c1
P0
P03
Select from the menu the program type to be1.
deleted using keys .
e.g. RANDOM P»
Press keys simultaneously for 2 secs.2.
The display shows "ERASE".»
Press OK to confirm.3.
The display shows "EMPTY".»
The program is deleted.
Select from the menu the program type to be copied1.
(e.g. RANDOM P) using keys
.
The program number flashes.»
Press for approx. 3 secondsOK2.
The program is copied in the first free position in»
the memory.
The first modifiable data (eg: channel) is displayed »
flashing.
Modify data as described in subsection 2-3.3.
2 programs with the same data cannot coexist!
i
Set ANNUAL PERIOD
Enables a defined period to be set, in which the program set up previously must
be executed.
The period defined in the annual program is repeated cyclically every year.
P02
Set the start and end of the period in the format1.
dd/
mm/-- using keys .
Press to confirm every field.OK2.
The annual period is set.»
i
3. Enter a new program or exit press the
button several times
MENU
Note: P YEARLY can be set over the end of a year, eg Month ON OCTOBER and
Month OFF March(the program will last a total 5months where the month OFF will
stop in thefollowingyear, and so forth cyclically).
Note: if no changes are made within 10 minutes or if is pressed several times,
the device willreturn tostart display andthe new duplicatedprogram will belost.
MENU
2-4 Check a program
2-5 Modify a program
1. Press to confirm program to be modified.
2. Set new values as described in subsection 2-3.
OK
2-7 Copy a program
Access desired program menus (STANDARD P, CYCLIC P...)
by pressing .MENU
23
C y c l i c p
R a n d o m p
E r a s e
R a n d o m p
E m p t y
E n d
A n n u a l p
C y c l i c p
R a n d o m p
EN
P02
C1
P03
P0
P0
C1
P03
C1
P04
C1
P03
3