Instruction manual

LG400 – Operating Instructions
-44-
service life can be extended a single time for another 10 years. Thus a total maxi-
mum service life of 20 years is possible.
The service life of a compressed air cylinder that is more than 20 years old cannot
be extended by means of repeated testing. When the maximum permissible service
has been reached, the cylinder must be emptied in a safe manner and discarded.
Additional important information on the use of compressed air cylinders
If you transport a compressed air cylinder by airplane or send it by mail, it must
be empty.
Check the pressure level indicator of a compressed air cylinder only when your
air rifle is unloaded and decocked. The pressure level indicator has an accuracy
of ±10%. Temperature variations can also affect the level shown.
Repairs on compressed air cylinders must be carried out only by the manufac-
turer, using original replacement parts. In the case of noncompliance the
manufacturer shall have no liability and the warranty shall be null and void.
Do not alter the surface of the compressed air cylinder. In particular, do not
engrave it or apply abrasives. This can damage the cylinder and create a safety
risk.
Inspect the compressed air cylinder for cracks and damage before each use.
Protect the compressed air cylinder against damage of any kind.
10 Changing the butt stock / cast
(Alutec only)
The stock is divided, allowing the butt
stock to be replaced by other variants
(special accessories). In addition, this
allows the butt stock to be moved
laterally by eight millimeters to the left or
right. To do this, remove the entire cheek