Instruction manual

LG400 – Operating Instructions
-48-
LG400 Alutec Competition & LG400 Alutec Basic
The cheek piece can be individually
adjusted in many ways. To adjust the
height, loosen the screw (a) and retighten
it after completing the adjustment. To
adjust the cast (lateral offset), loosen the
screw (b). Use the screw (c) to adjust the
inclination. To reposition the cheek piece
forwards or rearwards, remove the
countersunk screws (c) and move the
threaded pins in the required direction.
The best way to do this is to first remove
the complete cheek piece from the stock (undo screw (a) and remove cheek
piece).
13 Adjusting the grip
LG400 Anatomic & LG400 Alutec Expert & LG400 ALUTEC Competition
The grip is fastened to a ball-and-
socket joint, allowing every possible
movement about this center-point. In
addition, the position of the grip can
be moved in the longitudinal direction,
sideways and in its height. For longitu-
dinal adjustment and lateral
displacement, undo screw (a) and
move the grip to the required
longitudinal and lateral position.
Lateral displacement is achieved by
turning the eccentric disk from above.