Installation & Assembly

Floor Heating Cable Cross Section
with Prodeso Heat Membrane
Installation Support •[phone] • www.WarmlyYours.com
Wood Subfloor
Cement-based Subfloor
Gypsum-based underlayment
TempZone
Heating Cable
TempZone
Heating Cable
TempZone
Heating Cable
TempZone
Heating Cable
Existing, structurally sound
vinyl floor *
* CONSIDERATIONS CONCERNING INSTALLATION OVER EXISTING VINYL FLOORING:
- Vinyl flooring needs to be secured over the entire surface.
- Single vinyl floors ONLY (Multiple layers of vinyl flooring need to be removed)
- If foam or cushioned vinyl has been previously installed, the vinyl flooring needs to be
removed entirely and the PRODESO HEAT MEMBRANE needs to be fixed directly to the
subfloor.
- Vinyl flooring needs to be clean of debris, dust, oil, grease, and wax substances.
- Outside-perimeter-secured vinyl flooring is NOT acceptable for direct installation of
PRODESO HEAT MEMBRANE as it may cause undesired stress to the tile assembly.