Owners manual

2. Attach the solenoid bracket to the winch mounting bracket (when applicable) with two 1/4 x 1 bolts,
lock-washers and nuts as shown in Figure 2.
FIGURE 2
3. Install spacer (flat washer) and winch mounting bracket onto the carriage bolts protruding upwards from
the frame extensions and secure with 7/16 lock-washers and nuts. Figure 2. Tighten all fasteners to
proper torque specifications at this time.
4. Install winch as directed in the Winch Installation Instructions.
Warn Industries PAGE 2 13940 REV C0