Replacement Part List

ManualsBrandsWarn ManualsAutomotiveProVantage 3500, 3500 lb. Winch

WARN Industries, Inc. 89354B0

PROVANTAGE 3500

Part Number: 90350, 91035

Rated Line Pull: 3500 lbs. (1588 kgs)

Motor: 12V DC, 1.4 hp (1.0 kW) Permanent Magnet, Sealed

Controls: Remote and Handlebar Mounted Mini Rocker

Gear train: 3-Stage Planetary

Gear Ratio: 154:1

Clutch (Freespool): Sliding Pin and Ring Gear

Brake: Roller Disk

Drum diameter/length: 2.0”/2.9” (52mm/74mm)

Kit Shipping Weight: 29.8 lbs. (13.5 kgs)

Rope: Wire, Ø 3/16 x 50’ (Ø 4.8mm x 15 m)

Fairlead: Roller

Recommended Battery: 12 Amp/hr minimum

Duty Cycle: Intermittent

Battery leads: 6 gauge

Finish: Black Powder Coat

Warranty: Limited Lifetime

Mounting Bolt Pattern: 3.0” x 4.88” (76mm x 124mm)

Winch Dimensions: 13.12” L x 4.51” D x 4.69” H (33.3cm L x 11.5cm D x 11.9cm H)

Winch Weight: 15.3 lbs. (6.9 kgs)

WARN Industries, Inc. 89354B0

PERFORMANCE DATA

Pull by Layer

Layer/lbs. (kgs.)

1/3500 (1588)

2/2947 (1337)

3/2545 (1154)

4/2240 (1016)

Load Current Speed

lbs. (kgs) (Amps) Ft/min. (m/min.)

3500 (1588) 249.2 5.7 (1.7)

3000 (1360) 215.5 6.9 (2.1)

2500 (1134) 183.4 8.2 (2.5)

2000 (907) 151.0 10.0 (3.0)

1500 (680) 119.3 12.7 (3.7)

1000 (454) 88.3 14.8 (4.5)

500 (227) 54.9 17.5 (5.3)

0 17.9 21.5 (6.6)

Load Run Time Distance Cool Time

lbs(kgs) ft.(m) (min)

0 2.5 min 48.3 (14.7) 12

500 (227) 2.0 min 31.2 (9.5) 10

1500 (680) 1.0 min 10.6 (3.2) 10

2500 (1134) 35 sec 4.1 (1.2) 10

3500 (1588) 15 sec 1.2 (.4) 10

DUTY CYCLES

Should you encounter a problem during installation or operation of your

winch, please follow these steps toward resolving the problem:

1. Refer to your operator’s guide and installation instructions. It has

illustrations and detailed information on the installation and safe and

proper operation of your winch. It also includes a replacement parts list

and assembly diagrams. If you are unable to resolve the problem, then

go to step 2.

2. Contact your dealer where you purchased your winch. If, after discussing

the problem with their parts and service staff, you are still unable to

resolve the problem then go to step 3.

3. Call an Authorized WARN Service center from the list provided on the

back of the warranty sheet included with the product. When calling,

please have the following information available: winch model number

and purchase date, make, model and year of vehicle.

4. If you are unable to resolve the problem to your satisfaction, please call

Warn Industries Customer Service at: 1-800-543-9276. When calling,

please have the following information available: winch model number

and purchase date, make, model and year of vehicle. You may also

contact Warn Industries by visiting our website: www.warn.com

SERVICE INSTRUCTIONS

Summary of content (18 pages)

PAGE 1
PERFORMANCE DATA PROVANTAGE 3500 Load Current lbs. (kgs) (Amps) 3500 (1588) 249.2 3000 (1360) 215.5 2500 (1134) 183.4 2000 (907) 151.0 1500 (680) 119.3 1000 (454) 88.3 500 (227) 54.9 0 17.9 Part Number: 90350, 91035 Rated Line Pull: 3500 lbs. (1588 kgs) Motor: 12V DC, 1.4 hp (1.0 kW) Permanent Magnet, Sealed Controls: Remote and Handlebar Mounted Mini Rocker Gear train: 3-Stage Planetary Gear Ratio: 154:1 Clutch (Freespool): Sliding Pin and Ring Gear Brake: Roller Disk Speed Ft/min. (m/min.) 5.7 (1.
PAGE 2
SERVICE/UPGRADE KITS Wire Rope Assy, 3/16” x 50ft ................................................. PN 60076 Synthetic Rope Kit, 3/16” ...................................................... PN 73599 Contactor, 12 VDC................................................................. PN 76429 Remote Control, PV35, 10ft lead .......................................... PN 80958 Switch Kit, Mini Rocker, PV35 .............................................. PN 80588 Roller Fairlead Kit ...............................
PAGE 3
TREUIL POUR PROVANTAGE 3500 Référence: 90350, 91035 Effort en 1ère couche: 3500 lbs. (1588 kgs) Moteur: aimant permanent 12V DC, 1.4 hp (1.0 kW) étanche Controls: Télécommande et Mini-interrupteur installé sur le guidon Train d’engrenages: planétaire à 3 étages Rapport de démultiplication: 154:1 Embrayage (déroulement en roue libre): Goujon et couronne dentée coulissants DONNÉES DE PERFORMANCE Charge Courant lb. (kg) (A) 3500 (1588) 249.2 3000 (1360) 215.5 2500 (1134) 183.4 2000 (907) 151.0 1500 (680) 119.
PAGE 4
KITS DE MISE À NIVEAU/ENTRETIEN Ens. de câble, 0,5 cm x 15 m .................................................. Réf 60076 Kit de câble synthétique, 0,5cm............................................... Réf 73599 Contacteur 12 V c.c ................................................................. Réf 76429 Fil de télécommande, PV35, 3,0 m ......................................... Réf 80958 Kit mini-interrupteur à bascule, PV35 ..................................... Réf. 80588 Kit de guide-câble à rouleaux ...
PAGE 5
CABRESTANTE PROVANTAGE 3500 Nº de referencia: 90350, 91035 Tracción nominal del cable: 3500 lbs. (1588 kgs) Motor: 12V DC, 1.4 hp (1.0 kW) con imán permanente, sellado Controles: Control remoto y mini-interruptor oscilante montado en el manillar Tren de engranajes: Planetario de 3 fases Relación de transmisión: 154:1 Embrague (enrollado manual): Pasador y anillo deslizante Freno: Disco de rodillo Diámetro/longitud del tambor: 2.0”/2.9” (52mm/74mm) Peso de envío del conjunto: 29.8 libra (13.
PAGE 6
KITS DE SERVICIO / ACTUALIZACIÓN Conjunto de cable metálico, 3/16 pulg. x 50 pies .................. PN 60076 Kit de cable sintético, 3/16 pulg ............................................ PN 73599 Contactor, 12 V de CC........................................................... PN 76429 Control remoto, PV35, cable de 10 pies ............................... PN 80958 Kit de interruptor, mini-interruptor oscilante, PV35 ............... PN 80588 Kit de guía de rolete ............................................
PAGE 7
LEISTUNGSDATEN PROVANTAGE 3500 Last Stromstärke Geschwindigkeit kg A m/min 1588 249,2 1,7 1360 215,5 2,1 1134 183,4 2,5 907 151,0 3,0 680 119,3 3,7 454 88,3 4,5 227 54,9 5,3 0 17,9 6,6 Best.-Nr.
PAGE 8
WARTUNGS-/AUFRÜST-SETS Drahtseilsatz, 4,8 mm x 15,24 m .................................. Best.-Nr. 60076 Synthetikseilset, 4,8 mm .............................................. Best.-Nr. 73599 Schaltschütz, 12 V Gleichspannung ............................. Best.-Nr. 76429 Fernsteuerung, PV35, 3-m-Kabel ................................ Best.-Nr. 80958 Schalterbausatz, Mini-Wippenschalter, PV35 ................Best.-Nr. 80588 Rollenseilführungsset .................................................. Best.-Nr.
PAGE 9
PRESTANDA PROVANTAGE 3500 Last kg 1588 1360 1134 907 680 454 227 0 Artikelnummer: 90350, 91035 Klassad dragkraft, lina: 1588 kg Motor: 12 V likström, 1,4 hk (1,0 kW) permanent magnet, kapslad Reglage: Handtagsmonterad och fjärrstyrd minikontakt Utväxling: 3-stegs planetarisk Utväxling: 154:1 Koppling (frispolande): Skjutbart stift och krondrev Broms: Rullbroms, skivbroms Ström (ampere) 249,2 215,5 183,4 151,0 119,3 88,3 54,9 17,9 Hastighet m/min 1,7 2,1 2,5 3,0 3,7 4,5 5,3 6,6 Dragkraft per lager Lage
PAGE 10
SERVICE-/UPPGRADERINGSSATS Vajersats, 3/16” x 50’ .........................................................Art. nr 60076 Syntetisk lina, sats, 3/16” ..................................................Art. nr 73599 Kontaktor, 12 V DC ............................................................Art. nr 76429 Fjärrkontroll, PV35, 3,3 m. kabel ......................................Art. nr 80958 Kontaktsats, minivippa, PV35 .............................................Art. nr 80588 Linledarrulle, sats ............
PAGE 11
DATI DI PRESTAZIONE PROVANTAGE 3500 Carico kg 1588 1360 1134 907 680 454 227 0 Numero Pezzo: 90350, 91035 Trazione nominale linea: 1588 kg Motore: 12 V c.c.
PAGE 12
KIT DI AGGIORNAMENTO/ASSISTENZA Gruppo fune metallica, 4,8mm x 15,2 m................................ PN 60076 Kit fune sintetica, 4,8mm ....................................................... PN 73599 Contattore, 12 V c.c. .............................................................. PN 76429 Comando a distanza; PV35, cavo conduttore di 3 m ............ PN 80958 Kit interruttore miniaturizzato, PV35 ..................................... PN 80588 Kit guida a rullo ..........................................
PAGE 13
DADOS DE DESEMPENHO PROVANTAGE 3500 Carga kg 1588 1360 1134 907 680 454 227 0 Número da peça: 90350, 91035 Tração nominal da linha: 1588 kg Motor: 12 V CC, 1,4 hp (1,0 kW) – magnético permanente, vedado Controles: Remoto e interruptor mini-balancim montado no guidom Trem de engrenagem: Planetário de 3 estágios Razão da engrenagem: 154:1 Embreagem (movimentação livre): Pino deslizante e embreagem anelar Freio: Disco com roletes Corrente (amperes) 249,2 215,5 183,4 151,0 119,3 88,3 54,9 17,9 Velocidade m
PAGE 14
KITS DE MANUTENÇÃO/UPGRADE Cjto. cabo de aço 5,5 mm x 15 m .......................................... PN 60076 Kit de cabo sintético, 5,5 mm ................................................ PN 73599 Contactor, 12 V CC................................................................ PN 76429 Controle remoto, PV35, fio de 3 m ........................................ PN 80958 Kit de chaves, mini-balancim, PV35 ..................................... PN 80588 Kit do guia do rolete .................................
PAGE 15
PRESTATIEGEGEVENS PROVANTAGE 3500 Belasting Stroomsterkte Snelheid kg A m/min 1588 249,2 1,7 1360 215,5 2,1 1134 183,4 2,5 907 151,0 3,0 680 119,3 3,7 454 88,3 4,5 227 54,9 5,3 0 17,9 6,6 Onderdeelnummer: 90350, 91035 Nominale trekkracht: 1588 kg Motor: 12V DC, 1,0 kW (1,4 pk) permanente magneet, afgedicht Besturing: Afstandsbediening en op stuur gemonteerde mini-tuimelschakelaar Tandwielstelsel: 3-traps, planetair Tandwielverhouding: 154:1 Koppeling (vrij draaiend): Schuifpen en ringwiel Rem: Rolschijf
PAGE 16
ONDERHOUDS-/UPGRADESETS Staalkabel, 3/16” x 50 ft ......................................................... PN 60076 Synthetische kabelset, 3/16” ................................................ PN 73599 Schakelaar, 12 VDC .............................................................. PN 76429 Afstandsbediening, PV35, verbindingsdraad van 10 ft ......... PN 80958 Schakelaarset, mini-tuimelaar, PV35 .................................... PN 80588 Kabelgeleiderolset .............................................
PAGE 17
SUORITUSKYKYTIEDOT PROVANTAGE 3500 Kuormitus kg 1588 1360 1134 907 680 454 227 0 Osanumero: 90350, 91035 Nimellinen vetokyky: 1588 kg Moottori: 12 V (tasavirta), 1,4 hv (1,0 kW), kestomagneetti, tiivistetty Ohjaus: Kauko-ohjain ja ohjaustankoon kiinnitettävä pienoiskeinukytkin Hammaspyörästö: 3-vaiheinen planeettapyörästö Välityssuhde: 154:1 Kytkin (vapaakelaus): Liukurengashammaspyörä Jarru: Rullalevy Virta A 249,2 215,5 183,4 151,0 119,3 88,3 54,9 17,9 Nopeus m/min 1,7 2,1 2,5 3,0 3,7 4,5 5,3 6,6 Ke
PAGE 18
HUOLTO-/PARANNUSSARJAT Vaijerikokoonpano, 3/16” x 1 524,00cm ................................ PN 60076 Köysisarja, synteettinen, 3/16” ............................................. PN 73599 Kontaktori, 12 VDC ................................................................ PN 76429 Kauko-ohjain, PV35, 10ft johto ............................................. PN 80958 Pienoiskeinukytkinsarja, PV35 ............................................. PN 80588 Ohjainrullasarja .........................................