Operating instructions

SoftCare Evo - Type SE10 9-12
Control buttons CP1
Control buttons CP0
Navigation buttons
Chapter 9 - Operating units
9.5. Manual operation with the control
buttons
The control buttons can be used for manual opera-
tion of individual machine elements, such as the roof
brush, side brushes, etc. or of the complete wash
gantry.
At the operating terminal CP 1 you can access the
machine elements directly by pressing the according
button.
At the operating terminal CP0 you probably have to
shift the desired machine element symbol into the
display by using the navigation buttons. Afterwards
you may select the symbol with one of the buttons
F1 – F4.
The function which will be initiated by a control but-
ton depends on the operating state of the system:
Wash mode = a wash program is executed
Control mode = no wash program active
Wash mode
By pressing a control button the according machine
element will be moved. The movement remains ac-
tive as long as the button is pressed.
At the operating terminal CP0 only machine ele-
ments will be displayed which are currently ac-
tive.
NOTICE