Operating instructions
SoftCare Evo - Type SE10 9-84
Creating cards
Chapter 9 - Operating units
After the data entry has been completed the display
shows in the first line:
** Please insert card **
)
Insert the card into the card reader.
⇒ The card is drawn into the card reader and the
selected data will be transmitted together with
the station code onto the card.
⇒ During data transmission the display shows in
the first line:
** 1. writing card **
Up to three data transmissions will be executed. The
card will be returned after the third attempt has failed
and the display shows:
** Card writing error **
)
Repeat the procedure with another card.
The card will be rejected after successful data
transmission. The display shows:
** Please insert card **
You can now create further cards of the same type
by inserting these cards into the card reader and by
repeating the procedure as described above.